Update to the newer ghost firmware. 5beep and 2 flash was pretty broad. New update narrows it down to where the problem could be.
Type: Posts; User: 06x6spdGTO
Update to the newer ghost firmware. 5beep and 2 flash was pretty broad. New update narrows it down to where the problem could be.
Milwaukee M18 is my go-to for running just the Active Target Black Box (My Displays/Screens are ran from a 12v 100ah Lithium House Battery).
A M18 12AH HD Battery will get you about 8hours of run...
HDS Pro vs Live Benefits:
Faster Processor
Live 270* Sonar w/ Twin AT2s in a single pane
ping sync ability to clear Halo rings from traditional Sonar while using Active Target or Multiple...
Twin AT2 from Lowrance in a Combined HDSPro view is Live 270*
Believe Jordan Lee is running 4 - AT2's on one Network with Power Pole + Trolling Motor...
2 are for Rear Side Live, 2 for Scout...
Normal.
It’s 1 software package that can properly ID and update the detected hardware.
PM SENT
PM SENT
2-12s, 1-16, 1-10 Pro, Ghost and point 1
Ghost puck (TMC1) is its own point 1. No need to have 2 point ones and a Ghost TMC1 as long as your Ghost is N2K to the displays
my Point 1 is at the...
Gen 1 Relion
Gen 2 (latest model) - Continental
Contour Following - Can be very useful only if the lake is mapped an accurate. I prefer the Touch Screen of HDS/EliteTi electronics to create my own route where I want it... Especially in situations...
2 month old HDS 9 Live.
Still on v 22 firmware. Comes with power cable, Sun cover, inline fuse, and gimbal bracket
Only reason for selling added 2 - HDS12 Pros
SOLD
If the post (Stand-off) is loose it could be a over torque issue in installation??
The post (stand-off) isn't part of the re-work, moving the wire is.
Think you might be getting some flack as...
Solid Red Wire needs paired with the Red & Black wire at the original Red & Black location.
“some do and some don’t” = the factory has already made the wire move in production and the pedal plate...
What kind of 8ga?
DLO is rated pretty high http://www.cmewire.com/catalog/sec18-dlo/dlo-cu-01-amp.pdf
Not all 8ga is created equally in terms of high current, high heat, and vibration.
DLO...
Last year 4 of the top 10 in BASS Classic were on Tour Pro.
Stetson Blaylock (@1:58), Joe Nania, Kyle Welcher (@1:35) and Taku Ito (@1:38).
https://www.youtube.com/watch?v=t-7x6Ypppeg -...
Is the ProNav app changed with the yearly subscription for Cruise Control feature and Routes? Different level of detail?
How much is the subscription after the 1st year of Free use?
Post about yours #326 shows a motor replaced in less than 3 weeks? Maybe the service center and not the company?
Hardest part - Installing it a True Cable steer system with spot lock - Without twisting, kinking the foot pedal cables.
Most common problems I have seen are installation:
Head should be 90* to...
Just to clarify, if it is done at the factory - It would have the sticker on the outside of the box and on the bottom of the pedal. "Motors that have been assembled to these specifications can be...
Best to see if you have the ID sticker on the pedal plate. If not check to ensure the wires are moved to the proper locations. Red Wire and Red&Black Wire should be on the same stand-off closest to...
Or "chip-in" and pay Mercury to certify your battery for use on THEIR outboard to see if it meets THEIR standards for safety and reliability if its desperately desired?
Seems it is Their outboard...
I'd be willing to bet loose connection in the Foot Pedal Board or in the NMEA Port. 2 USB dongles are working flawless for updates. Had 1 issue where Dongle A wouldn't load it but Dongle B would.
...
Would avoid using some of the cheap batteries.
The BMS won't support amp draw from most major trolling motors. Expect to see random power cycles on the trolling motor at higher thrust settings.
Warranty Repairs are required to go through dealer/service center inspection & repair. Has been that way for along time MK is the same.
If you want to BUY a Main Control Board and repair on your...
https://youtu.be/Nj6r5_sycOM