I myself have a small aluminum boat with the spot lock not working well with holding the 5 foot radius and have tried every setting for the boat scale to no avail. My question would be as the...
Type: Posts; User: fishingman
I myself have a small aluminum boat with the spot lock not working well with holding the 5 foot radius and have tried every setting for the boat scale to no avail. My question would be as the...
If the receptacles are the stab kind (push in from the back) and not the side screw type, then they will get loose over time because of the heating and cooling effect which will cause them to loose...
Another thing you might consider is the weight of your boat-If it is a lightweight aluminum jon boat then spotlock doesn't do well. That is just from my perspective.
2017 or newer Terrova wired foot pedal
Looking for a 12 volt Terrova with bt and 45 in shaft.
I would like to downsize from a 24 volt Ulterra 80ft lb. ulterra trolling motor, to a 12 volt trolling motor with spot lock. My boat is too small for the 80 lb. version. It overcompensates on spot...
Just put your time on the water and make your adjustments. You will have fun and eventually you will get a good picture and maybe catch a fish or two. LOL Don't worry be happy. I have the same setup....
Wind doesn't seem to matter. I tried locking in on spot lock while facing the wind and it didn't seem to help.
I have a 1448 jon boat with a 80 lb. 24-volt Ultrex trolling motor that doesn't want to stay in position with spot lock. I have the boat scale set on (-2). I've tried all five settings. It wanders...
I've got a 2020 24volt 80 Ft.lbs. Ultrex on a 14 ft jon boat and it doesn't want to stay on the position that i lock it on. Spot lock comes on but the boat is all over the place. I've adjusted the...
Garmin sending new cable. Thanks
I need the pin layout for the 4 pin power/data cable. Ground is still connected. Thanks
Cancel post. Garmin sending new cable. Thanks
My 106sv 4 pin cable broke. Does anyone know which lead is the ground? The red is still connected. Thanks
Just checked BPS online and they have the Lvs 32 and GLS 10 on sale.
I have a 106sv with a bow and stern Gt52 transducers. Can i use a "Y" cable instead of unscrewing them when switching between bow and stern? Thanks
Replaced power connectors and upgraded wire. Worked all day today. Got my fingers crossed. We'll see??
Here is another pic of what'494732 is happening. I'm wondering if it could be a bad component on the circuit board of the GLS 10. Any help is appreciated!
I thought since it was greyed out that it didn't see the live scope. My friend says that it stops for no known reason and then will restart later..
No
My neighbor has a constant problem with his live scope not staying active. I have asked him to take a photo of problem. See attachment. Any help will be appreciated. I will keep posting pics of loss...
My friends 106sv power wires keep losing their connection. What is the best remedy for this? He unplugs them and reinserts them to regain their continuity. Thanks
Well thanks again. I ran the ver 18.0 and all is well so far. The sw says 18.0 and the simulator works. I appreciate all the help on the 93svuhd.
well i ran it and it took me to sw ver. 14.20
Thanks. I will give it a shot.
Thanks for the reply. I redownloaded another file ie:echoMAPwithSDCard_202010200 It is an application file. Do i extract it and then load it on an sd card or what is the proper way to use this...