Search:

SOLD

$20 each shipped or $50 for the lot.

https://photos.app.goo.gl/uSzt5fCz1BhZLmZ97

Thanks,
DG

Will this 1.5dd 1.5 work?
https://photos.app.goo.gl/NWyd1xYxgmHAHPC38

thanks,
dan

As anglers we do need to be conscious of policing ourselves about conservation and making sure our actions are not dangerous to our own sport. If we are not policing ourselves their will eventually...

Pm sent

PM sent

Drill holes in Reel seat like mentioned above or remove rear grip and glue reel seat with rod bond and replace rear grip/grips.

Thanks wayne!

I pilot and 2d transducer?

What is the better card that is capatible with the Helix 10 si/di Gen 1 for contours and detail? Don't neccessarly need a mapping card. I have used Lowrance graphs and Navioincs previously?

With...

What cable do I need to link my Ultrex to my Helix 10 si/di gen1?

Thanks,
DG

Think I have a used on in firecraw. Excellent condition

Pm sent

I do not know of a dealer that sells any part like you are asking. The two best solutions would be to salvage off turned in rods or call BPS to see if you can buy the part from them. As far as I know...

Finger nail to pack, round object to burnish that doesn't leave a residue.

Flex coat about 30 to 45 minutes flattened out on foil before it starts to thicken. Blow through a straw over the mixed...

If you must use sewing thread you can use Sulky Metallics with no issues readily available at most art stores.

If you find a.sewing thread you really like you can use Color Preserver over the...

And this ☝️

This ☝️

Also can look for the model that has that part during their rod trade in program. Sometimes you can buy bulk broken rods from BPS.

Wouldn't worry about it as it sounds just like the clear finish is scratched. To do it right you unwrap the guides make a circular rubber squeegee with a hole in it, apply light coat of semigloss,...

This ☝️ Ground up cork dust mixed in thick with Rod Bond then sanded down, from course sand paper to fine sandpaper. Will be stronger than the cork grip.

Not a Poes but Poes did make topwater baits. And some really good topwater musky baits. Im leaning handmade or Sission.

Any of the methods above will work. Also if the seat spins freely, 360 degrees, make sure you spin it around a few times so that the epoxy is evenly distrubuted. This will help ensure it does not...

I use dream reamers in a cordless drill. Go slow tske your time. Dont use the smallest one, that one melts every time.
You can also use scrap blanks and sanpaper stripes, or scrap blanks with...

Pm sent