Search:

Your ZX does not have a DMS installed in it. Only in FX and iClass from 2006 through 2015 models. I would check to see if something is under your bilge float switch or something wrong with the device...

Best I can find...hope it helps

I got the new "brain box" or DMS from Blink Marine and it has worked absolutely flawless. If you are a member of the Skeeter Boat Owner Group on Facebook you get a discount on the price of the module...

Not sure of the compatibility across year models I will offer $100 for the 2 switch panels. Let me know.

You are wanting the Skeeter PC21B from Blink Marine. Contact Tim Dawson - Blink Australia <tim@blinkaustralia.com>. He will get you set up with the US office in Chicago. He monitors the Skeeter Boat...

I am running a Blink replacement DMS and it works great. Everything works like it came from the factory. Only takes 30 minutes to swap out. Msg me if you have any more questiuons. Happy to respond.

However there is a Lake Fork based bait maker, GoFishLures, that decided to sponsor an open tournament the same 2 days the SOT would have been held. It will be a 5 fish limit for each day, adhering...

Contact Jim Boswell. I believe he is a member here also, but if not he is on the Skeeter Parts Facebook group. He makes great fiberglass replacements and can customize as you like. Here is his FB...

376287
Sorry for the landscape...it was too big in portrait and easier to turn it than resize it. ;-)

You can order the parts here to rebuild. They are easy to remove and rebuild. Hope this helps.

See Jim Boswell (https://www.facebook.com/jim.boswell.9) on Facebook. He makes some fiberglass ones just like the original plastic one. Really good product.

Here you go... https://www.dropbox.com/s/d6nwm6pgsgse2r0/Removing%20Skeeter%20Passenger%20Console.pdf?dl=0

Only time I have seen them replaced free was at the Skeeter Owner's Tournament and one of the boaters had theirs go out on the water and and the Skeeter team there happen to have one. Swapped him out...

No fuses for individual switches. You hold the button in for several seconds and the DMS box will reset the circuit. If you have lost all power there should be a main fuse for the DMS box. Follow the...

I have a like new (used twice overnight) cover I had Fun-N-Sun make for my 2012 22i in Hurst. It is for a dual console. BE willing to work you a great deal. Color is maroon. It is a trailerable...

I just got a new cover made. To effectively cover the Ultrex takes a lot of work. Good luck.

The SHO does not usually use a vented prop. That may be your issue with blow out and high RPM's. I run a 22i and it runs about 68 at 5800 RPM's with a non vented 25-T1 VMAX prop.

I would take the effort to call Skeeter directly instead of depending on what a dealer says. Sorry but sometimes Skeeter can help you find those obsolete parts or know of alternative sources. You...

I have CM2 Blades 8' if you are asking me.

I just picked up the sweet Power Pole bracket and the ELadder with 3 steps from R+R and it was $225 plus tax as I am local.

Here is mine....http://www.bbcboards.net/attachment.php?attachmentid=263778&stc=1

Several options...if you want one int he dash and one on the side you can use a Balzout mount. The Ram will fail under the weight of larger units like a HDS12 or I guess Helix in your case. Also...

Here is what I did. I ran a 10 awg positive and negative marine wire from my main battery to up under the dash. Under the dash I installed a 50 amp relay and ran the hot side of the wire from the...

You could easily test the theory by running a direct pair of wires from the battery on top of the deck and power the Sonic Hub with it and see if it reoccurs before you try and run anything through...

I think the DMS is set up for a finite amp draw as I had this happen to my 12 iClass. They probably allowed x amount of amps and when you slap new electronics in it blows the breaker, thus the...

What speakers did you end up going with? They look to fit nicely.