Search:

I am no expert, as for some insane reason I only get the follow the contour option in my garage .... that being said, I would check under your options to see if your GPS is looking at the Helix or...

Just a quick update for anybody this might help.

Ranger actually still carries the rocker switches ( which was very surprising) so I ended up getting from them along with the water pressure...

Hi Fellas,

As it notes above, the time has come and I need to replace a number of rocker switches and also 2 gauges if I can find them.

Pretty sure the rocker switches are Carling, not sure...

Hi Everyone,

Well in the process of upgrading my trolling motor, I found out that my bow light base has given up the ghost. So Ranger does not have anything and neither does Great Lakes Skipper...

Starting year # 2 on my Goodyear endurances, they would be my suggestion also ... :thumb up2:

Thanks, yes, pretty much at this point going to replace bearings / races / seals as it has been a few years and Ranger has everything, so now is a good time to do both as one is going. Not sure of...

Good Morning Everyone,

Yes, after many years of faithful service, one of my cool hubs is letting water in, as the oil is turning milky. I already drained the oil and put in new, and it turned...

Many thanks for everyone who contributed to this string.

I just replaced the brake lights on my 2002 trailer, and they look great, although I struggled to find a 271595, so I have 2 - 271594's for...

Much appreciated, thanks

Paulski

Apparently this is the year of my boat, as so far I had to invest in a new engine, my trailer reminded me not to wait on new tires, and now it is onto my lights .... :crying:

That being said, to...

Awesome, thanks for confirming Don. I will get my boat in to my dealer to get this added as I prefer to have this working correctly when installed and quite frankly my mechanical skills are pretty...

Thanks, I was told it was one or the other, I could not have both.

Was hoping this was me and my 11 thumbs could to though ... :bows:

SERIAL # 2B579977

OK, I tried it for a while, and I just like seeing my old Analog trim gauge working versus constantly changing my smart guage to see my trim level.

I believe I need this...

Many thanks, I was hoping somebody was able to come up with a solution to get both for water pressure and trim/tilt. I am halfway there ... :nanner:

SERIAL # 2B579977

Mercury SmartCraft 1.01-1.02

Despite my best efforts at getting my first muskie this year ( missed a nice one this morning ) the weather gods were against me with high winds...

I had to replace my 150 Optimax that just blew and have a 4 stroke on the way to replace it, but I am thinking the atwood is my only option right now as Mywedge is known to cause seal issues, and...

Forget the air compressor for me, that is good.

I managed to blew my engine /powerhead instead. Piston gone, metal in the spark plugs, no compression on any coils ....... dang that sucks big...

Pretty sure I am in the same boat. I was cruising @ 4850 RPM yesterday and suddenly power just went and I watched the RPM's fall all the way down to idle and then it shut off. Let it sit for a...

Definitely check the internal reservoir .... been there done that on my Opti

Thanks, I have 10 thumbs and was not sure how best to go about it other than I needed to repair each area in a slightly different fashion.

Paulski

Ok, it finally happened, I managed to get a chip in my boat ( 2002 )

So, it is not down to the fiber from what I can tell, so I am not sure if I need to do the whole kit as suggested for many...

I also replaced the fuel lines on my ranger 617 last fall and discovered an extra mercury filter also. It was not in too bad of shape in my case. The mechanic put in a new one for me and I am going...

Thanks for all the replies. I will check out the bow switch.

2002 Ranger 617DVS
2004 Optimax 150
2005 Kicker Mercury 8.9 4 stroke

OK, so just back from fishing for 3 days with no problems. I get home and wash the boat, as it was very dirty from...

My rebate took exactly 11 1/2 weeks to arrive earlier this year...:doh: