http://i1201.photobucket.com/albums/bb346/harbin_22/Mobile%20Uploads/Screenshot_2016-12-28-13-06-02_edit_1482948511922.jpeg
...
Type: Posts; User: Harbin_22
http://i1201.photobucket.com/albums/bb346/harbin_22/Mobile%20Uploads/Screenshot_2016-12-28-13-06-02_edit_1482948511922.jpeg
...
Yes it has 250xs on it now
It's tempting for sure. You guys know what a 2015 250xserc is worth lol. Said it had 90hrs on the engine with 2 years warranty left
Anyone know an estimate on big end speed with a 2010 21RCD with a 3.1L Yamaha 250 with Phase III, lightweight flywheel, 3.3L profiled lower unit? Eyeing a boat that I might try to get and put my...
Call EZLoader and see what they can do for you. They probably made your original trailer
X2 and they are so much stronger than the factory panel. Worth every penny
.05 volts can make a pretty good difference in idle performance. It is making it richer then it should be
Try to run the trim up slowly. Like small bumps of the switch. If you get running wide open, try bumping the trim back down a couple times
Got any before and after pics?
I will trade you an OX66 lower unit with the pickups on the side. They bolt right up, just a little different gear ratio.
How are you trimming?
My bad I thought you were talking about the Engine CDI
How much was the kit?
There are 2 of them on eBay right now for around $400. Just search "66X Yamaha"
They are proud of them new. I picked one up on eBay for $700. Make sure you get one that the part number starts with xxK or xxX like 66x. The xxL part numbers are salt water and they cut out 2...
I just help a buddy set up the same boat with a 25p turbo lightning. It had an excellent hole shot and would top out at 73.6mph on a calm lake. It had really nice performance all around. We ended...
That means you have around 21% prop slip, which is way to much slip. If the prop is in good condition, then you need to let the motor down or take some weight out of the boat
What is your prop to...
A 25T1 pushes mine to 80+mph in a small lake, when it was stock, a 25m went 72. You either have a crap prop or motor height is too high with too much trim. What is your rpm and speed?
I had to go to eBay. Watch out for salt water ECM's too. They drop cylinders during idle. The salt water series part number will start with 65. Like 65K. Need to look for any that start with 66
I just did this the other day. The factory stuff is 3/16" bungee. I bought the abrasion resistant cord from McMaster.com.
Hydro Tec guys (especially John) have been awesome to me. Couldn't ask for a better bunch of people.
Mine did a very similar thing and all signs pointed to the O2 sensor but ended up being the CDI was bad. Might be a good idea to test fuel pressure while the problem is happening
I zip tie the clips down on mine.
Use the search button. There are tons of debates about them. And you might put your post in the Yamaha section, not the high performance section
What kind of boat do you have? I highly suggest you get the solid motor mounts now too. You will have the entire mid section completely tore down to the tuner so the mounts will be a breeze to put...