Search:

The only place I know about is Monty Racing. Is there other builders out there if so who would you recommend?

Thanks

My 20 XDC I had issues with filling. Found that if I turn the fill handle backward only put the nozzle in about 1" start slow then wide open is working or me. But I also open the back lid when I...

Dead on Plastix

So I am building a casting rod. I placed the eyes on with tape. It casted fine. But when I put a static load on the rod the line touches
the blank. So I moved eyes added eyes it don't seem...

Thanks for the help.

So how do you find information on guide spacing?

The only thing I can find is the 3rd choke guideneeds to be 27mm x spool diameter

From spool face. Howdo you determine the remaining guides? ...

https://www.youtube.com/watch?v=Ll9SHeAJfCA

172 is

Connecting rods sorr my motor is J225HGLSSC

I am wanting to buy a set of OMC long rods. But not sure on part numbers I know theres two old and new style I have long rods in my motor now but are the new style that are weaker
I want the older...

2000 225 ho
what is the measurement from housing
to center of hole for the shift rod
i thought 26 17/16 but not sure.
thank

BBC home page under owners list

2000 johnson 225 ho

I know most Bullet Owners throw up when I pull in LOL

Setup 2000 225 HO Bobs coned lower unit. I am running a 28 raker 2. Alot of slip like 20 to 17% at 2 1/2 below to even with pad.
Talked to Mark Croxton he said Raker 2 is junk. He said look at...

Do bullet boats have "natural bow lift “built in”? I looking for a new prop in the description of some of the props its for boats with natural bow lift.

Whats the best way to clean block and all linkage every thing under the cowl it is a little sticky.
This winter would like to clean it all but what product is best that will not hurt all plastic...

J225HGLSSC

It takes forever to start the first time after sitting for a week but if motor is used daily its seems fine. Every start after that it starts the first turn of the key. I don’t think...

j225hglssc
The trim motor runs a bit before the motor starts to move. When it its moving sounds bad like low on oil.
I checked the oil level as soon as the plug was lose air come out and oil. So...

j225hglssc Want to go faster I know buy new motor. Any performance mods that can be done??

2000 225 ho j225hglssc. It has the L1 case. I am running it on a 20 ft Bullet I am wanting to raise motor hight.
To do this I need to send it to bobs have a nose cone installed.
Seen a old post...

https://ibb.co/ib5kNF

My first Bullet bought it in March of this year.

http://i67.tinypic.com/20rw7b5.jpg

Has anyone used the cover that Bullet sales? Is it worth buying? I am only using it for storage it will not be used when pulling. Or is Aurora boat covers a better option? The boat is stored...

I was looking at turbo TXP-ot4

johnson 225ho j225hglssc. Motor has the lighting lower unit. I am looking to buy new prop. But in the hub selction I see a 225 then I see 225 etec ho. One says 13 spline for 225 then says 15...