So I ended up ordering a 13x17 spitfire. Unfortunately it would not fit my motor. Turns out the gear case housing on my old Evinrude is too small. So I was never able to try that out. I did however...
Type: Posts; User: 92nitro
So I ended up ordering a 13x17 spitfire. Unfortunately it would not fit my motor. Turns out the gear case housing on my old Evinrude is too small. So I was never able to try that out. I did however...
Understood. Definitely appreciate all your feedback!
Well I definitely like the price of aluminum a whole lot better. So do you think then that the 12.5 diameter would be too small? Or is it just one of those deals where its hard to say for sure and I...
So after looking into all the different options I've decided to go with your recommendation and pick up a new spitfire 4 blade. I've also found that I was originally wrong about the current prop that...
I definitely will. And ill look into the spitfire right now
I gotcha. Well on the bright side trying out different aluminium props will be a heck of a lot cheaper than trying out stainless steel. You may have just saved me a whole lot of money. For that sir I...
Ok interesting. So basically instead of going stainless 13 7/8"x17 stainless i should go 13 7/8x 17 aluminium? Will this improve hole shot and crusing speed or will improve one or the other. Sorry...
Im running a 17'6" Nitro fish and ski with a 1992 115hp Evinrude 2 stroke. Currently I have a 13x19 3 blade prop and am considering moving to stainless. I can get up on plane just ok and my top speed...
Yep. I have a seloc manual that came with the boat when i bought it and thats pretty much the conclusion ive come to. Basically useless. I'll get myself an omc manual and go from there. Thank you!
I have pushed the choke and it made no difference. To be honest yes i have mixed and matched. I didnt realize that shouldn't be done. That's got me concerned. The power pack is cdi. That was actually...
So just to make sure my thinking is sound. If My model engine doesnt have slow mode. That means, if there was a t-stat or temp sensor issue it would have no effect on my wot rpms correct?
The motor is on a 1992 , 17' nitro fish and ski. Originally I rebuilt the vro. And thought I had fixed the problem. I took it out and it ran perfectly at first. Then as the day warmed up it started...
After thinking about this some, does anybody know if this motor has a safe mode, or limp mode? Is this something that could be caused by a bad temp switch?
1992 115hp Evinrude TE115TLEND. Won't rev over 3,000 RPM. It has a new stator, new ignition coils, new plugs/plug wires, new power pack, new regulator and rectifier. Rebuilt carbs and cleaned twice....
Confucius say: Man who fishes in another man's well. Catches crabs.
Cant go wrong with Vortex. Their warranty is worth dropping a little extra coin. For a more of a budget option(less expensive but not cheap) primary arms is a great way to go. For the 200 to 250...
I've started using some of their baits this year just to try them out. I've found that the bandito bug just flat out catches fish. Baby blue on a texas rig in stained water. As stated above they...
X2 on the fuego. Put one on a Dobyns fury medium fast and it's been a fantastic senko/finess not so expensive set up
Get yourself a transfer pump. Autozone has them for about $10. Wheel your generator next to your boat and pump it out of your boat straight into the genny
Veggie omelet out of an MRE
I actually used one of those amazon kits myself. If I remember correctly I think the oem kits were about 120ish compared to 30 or 40 from Amazon. I was a touch hesitant but figured if I didn't like...
Yep! Smoking and It did seem like it was using a touch more oil. I think the tear was causing the pump to lose a little bit of vacuum on the fuel side. So it was still pumping oil but less gas...
You're probably already aware but just in case, they make rebuild kits for the vro pumps. I had a similar issue. So i took my vro pump apart and found a small tear in the diaphragm. Ordered a rebuild...
Check out the diawa fuego. I picked one up earlier this summer and for a $100 reel it's been fantastic. Super smooth and feels quality. Great reviews all over
If building isnt really your thing though, Black rain ordinance has a good reputation but as stated above is a bit overpriced. Though right now considering the current climate if you can find a good...