Yes it will stay up and not bleed down.
Type: Posts; User: skeeterbrain
Yes it will stay up and not bleed down.
When I put motor, OX-66 , in reverse and give it any power the motor kicks up. also if I hit a wake it will some tines kick up.
Entire trim and tilt unit was rebuilt last year. I did the work myself...
Thanks
Do you have to have the Lakemaster card in when doing the I-Pilot Link update?
Anyone have the pin out and color code for the Humminbird Ethernet cables?
Is there just the upper and lower pivot pins holding the T&T unit on the frame?
I have seen a few YouTube video's about changing the trim seals but have not found one on changing the tilt seals.
Anyone have a list of parts and instructions on replacing the tilt ram
seals on a 2000 OX66 200 hp.
I have a Minn Kota Ulterra trolling motor on my skeeter Bass Boat.
Because it hangs off the bow so far I have it mounted on a slideing
plate so I can push it back so it does not hit the bow roller...
Check out Precision Sonar's cable saver.
Will the PS22 work on the Echomap 70S?
Will the PS21 work with an Echomap 70S? I just bass fish is water under 30 feet. Will the PS21 work for that. I want to see in front of the boat.
Check the voltage at the battery with a volt meter and see what it reads. The dash gauges
are sometimes not all that accurate.
I keep up all maintance. Water pressure at idle 5 psi 20 at wot. 76 hrs since new water pump.
TTT surely with all the knowledge on here someone has at least have a good guess at what may be the problem.
2000 OX66 200HP
Low oil warning light comes on and then will sometime go off.
Checked both tanks and they have plenty of oil.
Overheat light will come on intermittently. Checked tell tail and...
I have an Echomap 94sv that I have a lakevu HD Ultra map card in.
My problem is that I get shown as being on dry land when I am in
some depth of water and maybe 40 to 60 feet from where my...
Looks like you are having multiple problems. Best thing is to call customer support. You may just have a bad unit.
CS is great, I had 2 units that had a problem after an update ( lost internal...
Todd was right on. I had not registered the 94sv before the download. Registered it and re did the download . It unlocked it for all my registered units.
I have an HD Ultra map card that I use in my Echomap 70s. It was updated to the newest
version 2017.01. It works great in my Echomap 70s but when I put it in my Echomap 94sv
I get an error message"...
What does that mean? Referring to a 959/1159
Working with support on the issue. They are not sure what caused the problem but they are really going out of the way
to correct this. Support is going to replace my units even though they are 3...
2017 mapping will be released tomorrow. May 10th
After upgrading my EchoMap 70s to the latest software upgrade the last screen says"This update is not compatible with the built-in map " So I now have no charts. Whats up with that. I have the latest...
How do you change the default waypoint icon on EchoMap 70s?