Search:

First place I would check is the kill switch. I had the same issue and the wires on the kill switch were loose.

all on the same motor? might be something in the tilt/trim that is allowing for it to move.

So, friend of mine called me with an issue:

1. Lost TM Prop Pin in water.
2. Co decides to spin the nut back on while he is looking for new pin.
3. Now the nut (TH Marine Eliminator Nut)...

Had a bass with a crappie jig stuck in its rear. I could just see the eye of the jig. If'n you ever get into this scenario, make sure the fishes rear is point away from you and over the side of the...

Was short on punch hooks and in a town with limited choices, bought a major brand name and wasn't impressed at all. The biggest issue I was having was the keeper portion of the hook. Any...

Deduct some life span for rod twist, and hope you don't have to replace the eye on the tip.

I broke one off trying to adjust my JP. The black spacer with the slidemaster label on it is/was threaded. I squared off the bolt with a grinder, put the bolt in a very large vice, heated the...

I agree with all the above mentioned statements. Just hoping to help someone who might look at the list and think Wanahoo is worth traveling for...it's not.

It wouldn't matter how you defined the top 25 in the Cental U.S. Wanahoo would not be on the list

This list needs help. If you live in one of the regions and you want to help others out please chime in. Not asking for "secret gem" lakes, but if you want to help by telling others what doesn't...

Ultrex with Livescope. Get a used SI for the console...don't buy this new.

check for any foreign objects in all moving parts. small rocks, fishing line (I have had this multiple times), jig trailers, etc. Easy way is to use compressor...air blast!

In Puma FTD the following are not carpeted:


2 smaller tackle storage compartments forward deck
Net storage forward deck
1 large tackle storage area compartment forward deck
2 Day...

For starters, this truck is only a boat puller and the occasional load of gravel, mulch, etc. Not pulling skid loaders etc.

Would like any information on gas mileage since the Chevy went to a...

I did some trolling with a 17' Ranger with a Merc 115 (held the rods). I think it had a 19P prop and we put on a 15P... helped enough. If you don't have far to go from the ramp you could under...

I like the spotted tabasco skirt as well. Great with some GP and Watermelon Magic.

Just looking for the results.

That was a fast... they had like 8 of them yesterday.

BPS has them with free 2-day shipping...ordered via website.

It is manageable with the rod locker. I find the larger issue is the clearance over rods on the deck port side. Just not much room so be careful of reels.

I found the answer... there is a difference in bracket size. About 4'' longer on the mounting bracket.

Are the mounting brackets for the 45 and 52 the same size?
Easier way to ask... "Is the only difference the shaft length?" (insert joke here).
I have 52'' and its great in the water but slightly...

https://www.chron.com/life/article/angler-charged-with-fraud-cheating-bass-tournament-13686311.php#item-85307-tbla-15

Just my two cents...figure out the boat first w/options, then look online to determine what price point your looking at...many many boats will give you an idea of the price. Then start asking...

Your reading into the OP more than you need to. I still purchased the items that day, carry a BPS Black Card, and shop there for "need it now" items. But if a tackle store offers a discount to...