Just confirmed, not a compression issue. Cyl 1 is about 8% higher than the rest, but 2,3, and 4 are within 2%
Edit. Water was rough, and into wind, but down river and it's still running good...
Type: Posts; User: Dhagan887
Just confirmed, not a compression issue. Cyl 1 is about 8% higher than the rest, but 2,3, and 4 are within 2%
Edit. Water was rough, and into wind, but down river and it's still running good...
Okay, ran it to the water real quick. Pretty much unloaded, no passenger, no gear, 1/2 fuel. I think the trim tab is too far now. Steering seems more neutral but probably 55-60 degrees of wheel...
I moved the trim tab 1 more notch before taking it out this weekend. Heavier passenger, back to leaning left. Steering left seemed maybe a touch easier, but 1 had to hold the steering wheel 45...
Ohh I'm definitely going to try at least one hole. I think I will wait until I get somebody on the boat with me so I can see exactly how deep it's running while on plane. I have a feeling the plate...
Tried to get a pic but it's hard to capture all the angles involved, but this is pretty close. Hull vees all the way down to the keel.
Thanks, guess I'm just gonna have to learn to drive it.
...
2000 17'6 fisher marsh hawk, Merc 75 4 stroke. V hull, heavy, slow aluminum boat. Pretty much new to me.
Used to lean hard to the left under throttle, but I've got it riding level now with the...
Do you have any clue as to what exactly this would be an image of? Kentucky side, not very far off the bank at all at pool. Lock chamber makes alot of sense, even more so with the railings showing...
Fantastic shot!
Next pool up river. This dam was put out of commission by the cannelton dam. Roughly 20 miles upstream from cannelton. I tried a quick Internet search and couldn't find a single picture of this...
Nice man. Ladder in lock wall like im used to seeing. No window, no block foundation. I dunno what to think of mine really. Time to find out where the old buzzards there drink coffee and buy a...
Just noticed railings in 4th pic. Justin may be onto something. I am gonna have to get back there next time the river gets to almost flowing backward
edit, also the dam was named after the city...
https://s11.postimg.org/69hr91tz3/image.png
https://s11.postimg.org/byxztd05b/image.png
https://s11.postimg.org/4k8o0ze9r/image.png
Ya know, there are ladders on all the lock walls I've been around, ones that were constructed in this time period, as well as the newer dam's that replaced these old ones. And my roof could possibly...
We were within a foot of pool when it was taken, so it's 15' deep year round. Very close to the bank as well, out away from the main channel. I always think boat when I look first look at it, but...
Honestly, nothing worth a crap. I was in the middle of a catfish drift tbh, and it was just one of those perfect images that pop's up on the screen. I did run back over it one time up and down...
On a stretch of the Ohio I had never been on, about 50 miles from home. Screenshot from the ipad, hopefully it's clean, original was fantastic. hds7 Gen2 touch lss2
First glance i thought it was...
Married mine. 8 yrs married, 15 since we started dating
06 f250
70,034 on the ticker.
4934.9 hours
14.1 avg mph
We do about the same. Family of five though. Luckily I have 2 washers and dryers haha. With twin toddler girls and both working full time, we definitely don't get weekends off.
Granted my boat is a lot smaller, but I use my hustler zero turn to move it at least a few times a month. Over curbs and everything. Drag my 6x12 utility trailer around when trimming, etc as well. ...
It is a portable tank, no changes to it or the lines before this. I will be changing both soon.
anything else to a sync and link other than making sure the butterflies open and close together,...
First pic actuallyturned out to be 2nd (newest) set of plugs. Float level on top carb was actually lower (leaner?) on old set, and idle screws were within 1/8 turn of each other at 2 1/2 to 2 3/4...
Any insight on what's going on here? 4 cyl 75hp (serial a116902), 2 carbs, top carb has always been wet, but motor has been 10000% trouble free. Last trip out, it left me stranded for the first...
I've been looking around for something suitable for a while now because I'm a tightwad and didn't want to pay $0.20/sq inch. Found a thin rubber runner on sale for 10 bucks at menards. I think it...
Sling, Hulu, Netflix, and amazon prime here as well. Everybody in the house is happy with it so far. Cut the cord when sling released.