Looks like automotive clear coat. It’s gonna take a whole lot of elbow grease off that’s the case.
Type: Posts; User: mrcowley1
Looks like automotive clear coat. It’s gonna take a whole lot of elbow grease off that’s the case.
So, anybody have a ballpark on what a professional would charge to fix it. If it’s fixable.
:thumb up2:
Well, I stumbled across this project but think I've bit off more than I can chew and I'm looking for suggestions. She's rough, but that's Ok. Unfortunately I didn't catch something that can throw the...
I'm not certain of the RPM's because the gauge is doing something weird. The speeds in the initial post were GPS'd. I'll get the PTP measurement. Thanks for your help.
I recently acquired a 1990 Ranger 375 (17'10") and it has a Solas 13 1/2 x 15 prop on it. The compression is running around 100 on all cylinders and fuel system seems good. I’ve only been able to get...
Hope this is old enough!
1990 375V
1989 Mariner 150
408214408215
Thanks guys. I guess reading is fundamental. I hadn't gotten into all the literature the seller gave me but it has the original manual with the wiring diagram. According to the manual it is for the...
I just purchased a 1990 375V and trying to figure things out. Can someone shed light on what the two buttons underneath the rear deck lid are?
405595
Thanks
Thanks that helped but we cannot keep pressure in the tank.. One of the engineers took the vapor separator apart and it was gummed up so bad, the float was stuck. He cleaned it and put it back...
So, I work at a casino and we experienced a huge flood in 2011. The company went out and bought this 2010 Tracker Grizzly and ran it for about a month. I think its been used once since, but haven't...
Thanks for all replies. I'm definitely putting as much, probably more, foam back as it didn't have much to start. Having tinkered a bit with boats before I was shocked at the minimum amount of...
hey thanks slonezp. Never heard of the pond and stone brand.
I recently came into this 1992 Lakesport 170 by Rivertrail Boats who has since gone out of business. I've removed the panels and got it down to the bare hull. I plan on re-carpeting and maybe a few...
Post your S/N on this forum for a better response. You should know the max rpm rating for your particular model. Other problems will be a lot more technical, but there are experts on this forum that...
Sweet!
I cannot seem to align my boat on the trailer right and was wondering a couple things. Can anyone tell me if the Pantera II had a tandom axle trailer standard/optional for that year model. If so, are...
Have you gotten the prop to pad measurement? If so, it should be relatively easy. Especially if you have a buddy to help out. I would say just loosen the side bolts after you have placed a jack under...
Very cool!
Thanks
UPDATE! So the motor seems to be running fine. I had it out the other day and wham, the same thing happened. I'm cruising along at a little bit better than half throttle, about 3000 rpm, all of a...
1988 Pantera II
150 Mercury XR2
First bass boat I ever owned. I plan on using it to do little crappie fishing and bass fishing too!
4464844649446504465144652
Thanks alot, i think you answered my question.
Thanks. I'm going to eventually order the bench seats from bassboatseats. I think the fit and look a lot better.
CS24 Hinge Mounted Bench Seats