what does your axle spacing measure now, center to center of hub? How do your shackle straps look attached to the equalizer? They should be make “w” shape. I went through all kinds of issues getting...
Type: Posts; User: rat0502
what does your axle spacing measure now, center to center of hub? How do your shackle straps look attached to the equalizer? They should be make “w” shape. I went through all kinds of issues getting...
Is the trailer off the ground or are you trying to do one at a time or have you already got them installed and this is the result?
I don’t have any pictures, but on my 98 I just made the back end of my custom wedge 3/4” tall and ran it to that shroud. The 52” mount hangs over my wedge just a little but it worked. Pm me your...
this is how my 98 is set up this way as well
as stated above, I would start with the connections. Easy and cheap to try and seems to help with electrical problems on our older boats lol. It might not work, but it might!
on my 98, I can get to the sender through the access panel behind the center seat, but to replace it I would have to remove the seat pan. Not a super hard thing to do and plenty of youtube videos...
lol, worth a shot. I know it drove me nuts until I got the utility set right. Unfortunately every time mac updates it reverts back and I have to set it again lol. Glad to see you got somewhere on it,...
yes, if you use a Mac computer you have to make sure the “archive utility” is set correctly. By default Mac will unzip the file as far as it can which is too far for lowrance to recognize it. There...
what computer are you using? Would it be a Mac by chance?
That I can’t answer for certain because I haven’t used one, but I wouldn’t think so.
adapts your new 9 pin to 7 pin then you use the port you used to use.
Oh my bad, I didn’t see it was gen 3. Sorry.
Do you have both channels turned on? Black plug would be channel 2 I think?
Does your bow and console show the same temp and they’re both off, or is one 4 degrees different than the other? If they’re both the same, then calibrate to known good temp source, if they are...
Not mine lol but it’s a year older
On my 98 tr21, I used some hard rubber motor mount inserts on all of the bolts to raise it up over that panel. In the end, I ended up making a wedge to get the motor more perpendicular to the boat...
Pretty sure USCG placard is only for 20’ and under. My 98 tr21 did not have one. I ordered one online based on specs provided to me from triton, who does not have them anymore, when I was going to...
Exactly my wife and my experience. Honestly didn’t know we had it until we lost our sense of smell. Lucky I suppose.
nope, there’s no big ones in there, don’t bother!:smile: It has always fished very slow for me but there’s good fish in it.
I had to remove my base plate to reinstall the fasteners that loosened over time and I replaced my bushing While I had it off as it was a little sloppy. My base had a bronze bushing in it. After I...
Dead spot in the armature my guess. Take it in.
well, I will have to give that a try! Thanks
Thanks for posting this, I will try it out. Just to make sure I’m on the right page, you are saying adjusting the ping speed on the 2d panel also changes the scroll speed for the side image?
That’s what I was thinking. I don’t have any speed adjustments on carbon with 3-1 that I have seen.
And, bigger graphs are easier to read for old eyes like mine!