I will try a hard reset this afternoon, it has the proper source selected and does not say no source, Lowrance did reach back out to me and said they will call me and it sounds like they will have...
Type: Posts; User: mramey22
I will try a hard reset this afternoon, it has the proper source selected and does not say no source, Lowrance did reach back out to me and said they will call me and it sounds like they will have...
side scan and down scan does not work, just shows a blank screen, If i just about max out my contrast i get a very poor return on down scan but nothing on side scan
worked flawlessly before the...
24 fury 3 blade, loaded i get 72-73
Agree, they have always treated me well
NO PLUGS
Just wondering where is everyone mounting there box, just ordered one and trying to get ideas. Thanks in advance
I have a 618 and 1 of aerator pumps stopped working, before I take it apart was wondering what pump to order and should I replace them both while n there ?
I have a 2014 with a 175, dual poles, my team mate and I are big guys I switched from a 23 tempest to a 23 fury for the same reason, it comes out of the hole very quickly
1 bank works good. the other 2 when power up the green light turns on and the yellow light just keeps cycling from 25%-75% and they are not charging, it also wont let me change the battery selection,...
The cap is blinking red after I installed a new ckt board and a new cap as I had 1 go out on me, both power poles are working fine from all switches but the new one is blinking red, I also cant get...
Mine was doing the exact same thing, had it at 3 different places and Charles at mare of aquia found a loop in the fuel hose from the tank causing air to get trapped in the loop
he cut the loop out...
POTOMAC TEAMS OUT OF LEESYLVANIA
Is the fortrexx mount interchangeable with the ultrexx mount
Is a hydro jack plate worth it? What are the advantages and disadvantages? Thinking of upgrading but have no experience with them
yes sir
http://www.bbcboards.net/attachment.php?attachmentid=225485&stc=1
http://www.bbcboards.net/attachment.php?attachmentid=225486&stc=1
Done some air brushing on my hds covers
mare of aquia
180992
Finally got him to go and now he is hooked, this is his biggest so far
5lb 8oz
Now all he wants to do is fish which is great
They have treated me well:thumb up2:
he has tried to remove the plugs and has tried different combinations, with little change, i measured his prop to pad and it is at 5 1/2 i am not sure what it should be but i would think it should...
He has a 26 trophy and it is sluggish out of the hole but top end is great and it is an efi not a optimax
WHAT SHOULD PROP TO PAD MEASUREMENT BE ON A 2004 TR20 X WITH A 225 OPTOMAX
I AM ASKING FOR A FREIND WHO IS HAVING HOLESHOT PROBLEMS THANKS IN ADVANCED
WHAT IS THE CURE TIME AND HEAT SETTING I SHOULD BE USING? THANKS IN ADVANCE
VERY NICE
Just wanting to make sure before I purchase the wrong bracket, I will be getting a 8ft blade and what side do most prefer it t be mounted on and what bracket does it take
I got the part number from...