Thanks and I'll try that
Type: Posts; User: Greenhead1980
Thanks and I'll try that
No because I never have had to before and I've had these units since the debut of em
My 998c is not showing colors in down image and side image it's very faint until I get into shallower water I'm running my si range at 40' both directions in 10'-20'of water once I hit under 10' deep...
Look at your valve when u get a chance and see what color the lever is get the same one it will be like orange or green replace the whole thing
Use whatever cartridge base brand you currently have is easiest probably Johnson pumps now it was like gxp pumps I think if it's yellow and black it just twists off after you release the tab go at...
I used a jigsaw blade for wood because the bi metal blades were loading up too fast because there is more of the teeth closer together and smaller the material ranger uses needs to be on a space...
I would go to ranger but they use UFP parts I'm thinking so any trailer parts shop that deals in UFP products
Wondering what best prop would be for take off and keep the motor from over revving?
on a 2004 521vx w/ a Yamaha hpdi 250 top speed isn't a requirement
Thx a lot
I'm lookin for Wayne got his name from don weed can u get back with me please!!!
Just wondering what props everyone likes on a Yamaha 250 hpdi engines with a 521vx
I went to try to plane out today and it got about 1/2 way then the motor just died so I started it right back up and it starts and idles fine but every time I try to plane out it just dies about...
My motor is a 2006 Yamaha hpdi
My ranger 521vx tach is jumping around not accurate but not all the time y'all think I just need a new tach or any other suggestions are welcome
If this helps here's the switch and lense you could use in your recept
Maxxima Boat Cabin Light | eBay
Any tips on what prop a 521vx with a Yamaha 250 hpdi would be best for hole shot due to I'm not much of a speed guy? Right now it has a 27 tempest and is running 40mph at 4,000 Rpm's does that sound...
Maybe I just got a weak batch
Brush man river fish are mean
Has anybody had any issues with straightening trokar flippin hooks and jig hooks Me and a buddy has straightened both this past week wonder if there's an issue we are using braid so we are rippin...
FYI fellas it was a circuit breaker the ones on the battery terminals themselves lesson learned with the push of a reset button
I'm gonna put one after this lil incident
No circuit breakers at all I'm gonna check for loose connections at the battery
My maxxum shut off after a while of trolling through shallow stuff I checked fuses all good no breakers on the boat 1996 skeeter zx180 traced wires from batteries to minn kota and only got 12 volts...
Can you use power tune in fuel injected engines?
Trying to get some opinions in best post spawn type baits?