The livewell repair kit from FloRite is not that much money, however getting to the livewell pumps is a bear. The fix is easy, just in a difficult location to get to things (at least on my 2010 Alpha...
Type: Posts; User: caribfuture
The livewell repair kit from FloRite is not that much money, however getting to the livewell pumps is a bear. The fix is easy, just in a difficult location to get to things (at least on my 2010 Alpha...
Do a quick search of the major stores...they carry almost the same thing. I just ordered a few different colors to try out on Oneida Lake and some of the local lakes around NEPA. Not much into the...
Shoe GOO all the way! Had to re-glue every single compartment (except no shoe goo for the livewell!) on my 2011 alpha. that was 2 years ago, and no such issues. Shoe GOO is great stuff for securing a...
Same issue here on the 2011 Alpha 211. The way the motor sits across the front rail makes any of the store bought lock downs tough. *WARNING*...the bracket that holds the shaft near the top of the...
I have to uncover the boat tomorrow, and I'll try to get a picture to post here for you. I have the mounting bracket a few inches out from the driver side bow gunnel. The mount sits just to the right...
So what I found was the studs were 19mm. I torqued to 90 ft/lbs. I had read from 75 to 110, but most opinions pointed to a little less torque than max for the aluminum. I'm that guy now that has the...
So...the trailer tire FYI first...Cleaning up everything this weekend, had the boat out of the garage and see that the port side front tire has a nice phillips head screw sticking out of the top of...
Sorry, to be clear...the clarion is mounted above the passenger console glove box, has a separate aux input beneath the bottom of the glove box. The two speakers are beneath the consoles as mentioned...
I have a 2010 211 that I bought used late...late in 2013 with 75 hours. The boat came with a clarion system with two marine speakers (I believe JBL), one under the drivers and one under the passenger...
not to jump your thread, but shoot me a PM if you're going to be up north in the area sometime. I will be spending a lot of time on the lake this year, and the random weekends here on the local...
Ken, I have been driving myself crazy trying to diagnose this as well over the past week. I double checked all wires from the trailer connection back as far as I could trace it into the break away...
Something similar happened last year with my trailer. Brake light would come on in the truck randomly and I would feel the slight resistance of the trailer. Messed with the connection a few times and...
Hey bud...this seems to be a common thread. I posted my experience and a step by step guide to how I ended up having to do it.
Here is the link to the post:...
I'm not saying this is the fix, but there should be corner drain holes in the recessed area between the seal and the outer edge of the compartment. I had to go through all of mine and clean out...
you wouldn't believe the crap that came out the drain hole when I did a "flushing" of the hull. I sprayed water from the hose down where the livewell and bilge pumps are located. I sprayed both up...
here...I went through the same thing last year. I would say it was it was a moderate fix. Just need long arms to get down to the pumps. Other than that, remember not to pull the existing cable out...
I run Amsoil in everything from the motor to the lower unit. I keep a spare ethanol treatment when I'm not able to get the nonethanol at the pumps, and throw in ring free during every fill. This is...
Already on it! Thanks for the reminder post. Hope a good turnout like last year. I jumped all over this as soon as it was announded on their website.
See you there!
That was the problem. After the boat sitting for 2 years from the previous owner (75 hours for a 2010) I did have it serviced by the marina in northeast pa, which I thought had taken care of the...
I just wanted to post the recent experience I had while getting my 2010 Yamaha VMax HDPI serviced / worked on for all the Upstate NY / Central NY guys looking for a great, honest and reliable place...
Target,
Cool. Thanks for the info. I took the boat to Oneida Lake Marina for service on the Yamaha. So far, their Yamaha mechanic has been great. I would recommend them for any of the Yamaha guys...
Ken,
I will be up at the lake hopefully Thursday night and the weekend before to pre-fish for the Paycheck tournament series the following weekend (July 18th and 19th). If you would like to try and...
So here is what I found out so far...there are two authorized Yamaha places close by to where I stay on the weekends. Fremac Marina and Oneida Lake Marina. My family has dealt with both in the past...
Not sure about in LA, but here in PA you have to pay taxes when you transfer the title and register the boat. I went through this about a month ago. Bought a boat from MS, and in order to get the...
Has anyone been to this dealer? I hope to have the boat in the water next week and would like to have a reputable dealer in the Syracuse area through the year as I will be up there most weekends and...