Search:

I have carried one of these bad boys for about 10 years (after I got out of the Air Force and didn't have to avoid carrying stuff in my Blues front pocket.) My Father-In-Law gave it to me for...

As I mentioned before, I was able to lube the subject hub and everything seems to be fine.

Of course, once I got it done, the replacement axle, including hubs, arrived the next week. Awaiting an...

Looks like a competitor for inboard/outboard drives. May even be a good one, but frankly I doubt the need for it outside of pontoons..

Won't be very useful for bass boats unless that back deck...

Going to come at this with a different approach.

When I bought my boat it came with an Ultrex and one Power Pole. In the Alabama lakes I fish, I never really used the pole, as the water was too...

I have done that many, many times. However, I have exhausted pretty much all avenues to borrowing a hydraulic press for the rear seals, and I really don't want to buy one that I don't have room for...

Long story short: I have reached my level of incompetency regarding repacking a trailer hub.

So, now my boat and trailer is sitting in storage, missing a hub with the axle on a jack stand, about...

Thanks everyone.

The ones I am looking for are the 1.98-inch size.

Cheers.

So, no Bearing Buddies have a blue disk? I don't think that's true--these look a lot like what I already have on my trailer (photo via Amazon):

493058


Unfortunately, whichever one I have, the...

Looks like it is time to repack my hubs. What size Bearing Buddy is the correct size.

I know I can order the right bearings off of the BassCat website (though they are more expensive there--if...

I know there are plenty of fishermen on Gaston with boats similar to the H18, but when the wake surfers start chopping up the water in mid-morning, I'm not sure I would want to be on the main lake in...

I will send you a PM.

Also, with the advent of boat wraps, the boat the pro is in has become less prominent in the individual pro angler's marketing profile. It's rarely the most prominent logo on the side of the boat or...

Yeah, to each his own. I don't hate them; they saved me over $300 over another dealer with admittedly more attractive wheels. Maybe I should have gotten brushed aluminum. Oh well.

But, with the...

The old ones were 10" wide, which meant they rubbed on the fender of the trailer. In fact, the last time I had it off the trailer, I saw some places where it had worn through the fender. Eventually I...

Yeah, that's what I think. I just don't know why I would need them or why he thinks I would need them when he hasn't even seen the trailer. I went to some tire guys asking for information, but wasn't...

Yeah, I'm not sure why he is asking.

Thanks.

Thanks.

Any idea on the lug size, thread size, and pitch?

My tire guy is asking.

TIA

Worst case is I have my tire guy figure it out. The most important thing is that the wheel not be 255 mm wide with a 3/4 inch offset.

That's what I have now, and it's likely to cost me a fender...

Does anyone have the numbers for the rims sold by BassCat?

Their parts website does not currently have any for sale. I guess supply chains are hurting everyone.

Unfortunately, I don't have time...

Well, it's probably enough for your back-up boat.

After seeing that BassCat recommended using a transom saver that connected to the trailer, I replaced the motor toter my boat's previous owner used with the more traditional design.

I have...

I have a pair of the SplitShot frames with the saltwater lenses he recommended for a while. They fit really great--better than the more proto-typical Oakley frames. But, I wish they had some type of...

One afternoon when I was home for the summer in college, I started having a stomach ache just after lunch. It progressed for the next few hours such that by 4 pm, I could not stand up. My mom took me...

Another vote for a Lansky. I really only use 3 of the stones, and I get my knives plenty sharp.

Almost foolproof.

The gel kit from Bass Cat did not come with the hardener. I found some at an auto parts store.

Will end up doing that repair tomorrow.