Can you message me a pick up price?
Type: Posts; User: jeffbob
Can you message me a pick up price?
When I hold the choke/key in while running it will attain full speed. I obviously have a fuel delivery problem at high speed. Any thoughts as to what my motors problem is?
Yes the carbs were rebuilt about 6-7 years ago and it ran fine until last year. It has been 11-12 years since I replaced the fuel lines and bulb, and i'm starting to think it's a WOT fuel delivery...
BTW we are going to put the old OMC test wheel on it and do some running tests at the ramp. Wish me luck
J150plees Starts fine and idles fine. Goes great out of the hole. While running at around 38 mph/3600-3800rpm it goes great will do it all day with about 1/3 pedal left in the hot foot. When I mash...
2 boxes of Jiffy and 1 box yellow cake mix-yummy! Might need two cast lron skillets. My wife made it in a 13X9
Can you get a hold of anybody at Monty Racing? I heard Gordon had some surgery and was cutting back hours at the shop.
Is there a chance that the cylinder head is leaking? Could I check it with starting fluid?
I'm gonna get that darn can of compression, heck maybe even two cans, and give it the juice. Wait 15 minutes and send it!-LOL Thank you ELGIN for the dose of reality with a lil humor. Does anyone...
Is there a quick fix or just rebuild it? Should I pull the head and check the O ring? Could it have a stuck ring in that cylinder?
So if I can not find a factory manual for my 1999 Johnny 150 can I cross reference a 1999 Evinrude 150? J150PLEES vs. E150PLEES? Also, where would one get a hold of the best version of this manual?
Okay here is the update. On the compression test the starboard side has: top=100, mid=105, bot=95, and the port side has: top=105, mid=100, bot=pumps up to 75 but will not hold pressure. Still...
Good news. I didn't do a comp. check, but I did pull all plugs and regapped. It fired right up and ran. I'll get into specs and all needed parts. Yes probably did weaken the thermostat springs. I did...
My Johnny 150 got plugged with muck and really overheated. After cleaning the water intakes and letting her set it started and got us back to the ramp. After inspection this morning the drain nozzle...
It's a little south of there, but for future reference you could stay at Clay's Park. It's a lil pricey, but there is a lot to do inside the park too.
You can catch fish at Long. No HP limit just no wake all areas. It is a slot lake that is being managed for Big Bass! 14"-20" must be returned so it's got a few ;-). You will catch 'em on just about...
Check out Fishermans Central-They have a lot of hair jigs. Check out the Lake Warrior Tackle Kitchen Sink jig. It has multiple skirt materials combined. They also have some special order jigs too....
I saw today where Brad sent some cranks to Matt & Mark and the read his letter too. Pretty cool and good looking crank too.
Replace all the springs while swapping out the pinion gear.
I have a new 723c and paired it with a Revo ALX and it's awesome. It is a warranty replacement for a 704c Max. It seems a little better quality than my old Max's and lighter too. I love it. DrewFlu33...
3 blades are faster than 4 blades...Raker no doubt same pitch to start
Hey Chris do you rebuild OMC's and Mercury's?
A great post. Very well done and good job on the boat.
due to the weather they won't get 75 boats as in the past. But up here we're nuts-LOL Never too early for a tourney
Maybe next weekend. 39 for a high won't bring out too many. Good luck