Newer Sabre's come with a manual 8" plate. I could be mistaken, but I think the older models were 6" manual. I'd call BC
Type: Posts; User: Midnight Rider
Newer Sabre's come with a manual 8" plate. I could be mistaken, but I think the older models were 6" manual. I'd call BC
Regardless, Ronnie Gilbert can make it a better prop than a stock one. He knows what he's doing, especially on a BassCat. He worked a 24 Tempest Plus for my Sabre with a 175 SHO and it was night/day...
Get the 150. You can always throttle back to 2/3 rds and you'll get as good or better fuel economy as you would the 115 at wide open or 3/4. Plus, if you ever decide to sell the boat, it will sell...
I had a PII back in the 90's that had a Malibu Silver boot and hull. I would stay away from any "disco" colors on the boot though.
You can get some information from the engine to show on the HB gauge view. You'll need the lowrance cable that connects to the engine, and then adapts to the NMEA 2K backbone. The backbone runs to...
It was not meant as a political statement. But, facts are facts, and the POTUS is DIRECTLY responsible for the increase in steel, aluminum, etc. prices. Most people are under the mistaken impression...
IF the pitch is actually true, both props would be identical in terms of pitch, which, in theory, is how far the propeller travels through the water each revolution. Of course, none of them actually...
Your statement makes no sense, logically. If you have a prop that is a lower pitch, your hole shot will be QUICKER. What is your water pressure at wide open throttle? On a boat like yours, a typical...
Whether you believe it or not is irrelevant. There are valid reasons for taking the long term financing and then paying it off more quickly. And it happens frequently, regardless of what you think....
Uh...the point is that previously China steel was cheaper. Higher prices on the raw product means higher prices for everything produced from it. Looked at the prices on pontoon boats lately? About...
I have been in some fairly rough water on Lake Martin in Alabama, where the lake is at it's widest. Between the wind and the damn wake boats, Martin can get some 3 footers easily, and I have never...
As mentioned, Bravo I FS/XS props are produced in even pitches, then tweaked at the factory to increase the effective pitch. So, your 25.5 started life as a 24, then got cupped to make it a 25, then...
First question: Do you gain speed when you trim it up to the point where it starts chine walking? Rule of thumb: Raise the engine until you increase RPM with no increase in speed, and/or you lose...
If the steel is coming from China, you're paying for Trump's import tax. What people don't understand is that when an import tax is levied, the delivering country does NOT pay the tax, the importer...
If you are limiting your $$ to between 30-40 K, you will be limited in what boat you can buy new. Almost ANY glass boat with a 200 hp engine is going to be over 40K. I personally would avoid a Nitro...
$500 for me on a new BassCat Sabre in 2017.
Send whatever prop you decide on to Ronnie Gilbert and have him work it. Best money you'll ever spend.
Send whatever prop you decide on to Ronnie Gilbert and have him work it. Best money you'll ever spend.
Lots of variables here. First, do you have a jackplate? If so, what kind/size? What is your prop to pad measurement? What is your water pressure at WOT? Fury props tend to like to be run deep. ...
If you want a prop that carries a heavy load, even in the summer, then I would consider the Mercury Racing Bravo 1 XS (It has 8 vent holes for the 2 stroke). Merc recommends going up 2" in pitch if...
How much money do you have? Long lenses are very expensive, regardless of brand. If you want to do serious bird photography, it costs. Long lenses, sturdy tripods, and really good ball heads or...
I'll throw a wrench in this discussion and say take a look at the Fenwick Elite series rods. I have several and they are great rods for the money. Very sensitive and comfortable handles/reel seats....
Nope, just a Cullman redneck. If you know anything about Cullman, you understand.
Is this thread talking about the water pressure gauge or the speedometer? The small hole on the front part of the lower unit is NOT a pickup for water pressure. That is for the useless Analog...
Yamaha pressure needs to be no less than 11psi when running wide open and trimmed out. I have a 175 SHO and bought the digital sending unit so my graph would show water pressure. The fitting that...