Looks like a spun hub rubber. Get a new one put in your prop and your good to go. Buddy of mine has the same boat and prop, his runs 65mph spedo. but he also has replaced rubber in his prop this...
Type: Posts; User: jaws101
Looks like a spun hub rubber. Get a new one put in your prop and your good to go. Buddy of mine has the same boat and prop, his runs 65mph spedo. but he also has replaced rubber in his prop this...
Thats the place ! Thanks again Lyn! JoeW. http://www.bassboatcentral.com/smileys/bows.gif
Lyn, You got me all fixed up on the ranger trailer, Great brakes! Now I have another trailer with drum brakes and the back plate is history 4 bolt pattern, And so is the brake cylinder, single. I...
Is their a rebuild kit for the fuel pumps out there some where a lot less than a new pump? http://www.bassboatcentral.com/smileys/popcorn.gif
My switch is working, but the linkage is as loose as a goose. But it does activate the switch. What I'm more concerned with is at warm-up at the ramp, the old girl is at take off speed for a trip to...
Where would the interrupter switch be located? when I have the hood off the carbs and linkages are as closed as possible. so it is the timing or the switch I would recon. ...
I seem to have trouble with the engine idling down so I can put in gear. After it is in gear it goes to a nice idle. I have backed off the idle screw to the point that it is away from the stop, but...
I have a 95" 200hp rude that after a few laps around the lake was running great, then after fishing a wile 1hr. I refired up and I had a buzzer going off, solid buzzer. I then shut it off and then I...
Groutsky, If you are looking for some open water and a little competition. We are having a tournament on 3 mile lake April 5th. Go to hawgzbassseries.com for more info. ...
Fastshaft: In my case where my truck and boat were stolen, striped clean and then burned to the ground. They paid me 80% on both the truck and the boat. What saved me on the equipment on the boat was...
That ain't nutten! You should see what Blue Water LED's did to my Hawgz Bass Series Ranger! Pics tonight ! http://www.bassboatcentral.com/smileys/praying.gif
I did install a set of high Metallic pads, and trust me! they will stop you on a dime and have a nickle left! BUT after a month of running they will squeak and grind you out of your mind going down...
It was a flat piece, of looks like stainless steel that was 1/2" inch tall x 1 1/2" long and was flat and it was stuck to a magnet on the flywheel. I got it fished out and the clicking went away ,...
I had a ticking noise, sounded like under the flywheel. So I was inspecting and found a piece of steel stuck to the flywheel magnet. It is about 1 1/2 long x 1/2in tall and it has looked like it was...
Joe, When you get to the web sight sign in. Both Hawgz.com and Hawgzbassseries.com. That way you can keep track of stuff going on the tournament trail. Wednesday night it took over 10lbs on 3 fish...
No it's the weekend after,on Saturday the 31st. Would love to have you and some of your club guys at Brushy. We have two tournaments at Brushy this year....
The Tournament went great! had 19 boats and it was won with 17.48lbs.Big bas was 5.98 I think 5 or 6 went over 5lb. Big Bass, 10 teams turned in over 10lb. I got 4th. with 14.78lbs. But I am having a...
You guys coming to brushy? thats my home lake. I fish the Wednesday night League there. I'm heading down to 3Mile Lake in the morning for the Hawgz.com Bass Series Tournament. The big bass are still...
Trailer already has round 7 and my rev lights need the big middle post to carry the load. Now I need the 12volt lead for the boat charging system.Way beyond the flat series couplers....
My problem is the truck has a 7 prong plug and one of the prongs is a 12 volt for the trailer. Looking at the plug from the rear of the truck witch one is it ?...
I don't know if eth. makes a lot of diff. But we tested % In our town and 3 stations had close to 30% eth. mix. Beware. http://www.bassboatcentral.com/smileys/popcorn.gif
Yesterday the lake was really turning dark. Ice guys were using a plank to get out on the ice on the north end. Soon the ice will be gone. Soon. http://www.bassboatcentral.com/smileys/popcorn.gif
Just jumping in Joe Winkler from Webster City Ia. Running a 95' 392v 200hp. Ranger. Have fished the Wednesday night league at Brushy Creek for the last two years, and thought would spring out to do...
Put a slice in a tennis ball and run the strap thru and tie a knot in the end to hold tight. http://www.bassboatcentral.com/smileys/popcorn.gif
Before you try to clean off you need to kill the mold with a 10% clorox bleach and water. just wipe on and rinse off will do the trick. Then clean as you would like. But must kill bactteria or it...