Send it to Croxton Props and have him work it and balance you will be amazed at what that 23 will do?
Type: Posts; User: pastormark
Send it to Croxton Props and have him work it and balance you will be amazed at what that 23 will do?
187 Champion 175 efi Mercury
When I get up over 25mph I lose my depth reading. I have a Ti2 Lowrance. 3-1 transducer. Any ideas?
Mine was leaking around one of lights. I thought it was the valve. Fill the live well and see if it comes out the drain or the live well drain.
I run a 23 Temptest worked by Croxton on my 187 with a 175 EFI.
Youtube will guide you through it. Just type how to remove Quicksilver 3000 throttle.
Steve's is close and does excellent work. I believe he is in Indiana.
PB 2 has a good ramp and just around the corner is another nice ramp (don't remember the name). Both have good parking as well.
I have a 1999 187 and I had water leaking around the light in my live well. Pull it out and resealed it and stopped the problem.
I run a 175 EFI on a 1999 187 and 62-63 is about normal. 4 inch below pad. Good lift at 58.5 rpm's. I had my prop worked by Mark Croxton last year and it helped a bunch.
Did anyone else fish this at Table Rock over the weekend. I went over Friday night and was very disappointed in the turn out. Baitworkx had a small trailer. Lews had a small trailer and that was it....
pro tec makes a kit that really works good. ProTec Products - Home | Facebook
Balance and blue print prop makes a big difference.
I upgraded wire. i was wondering if I needed to get a deep cell or if the starting battery was fine? Yamaha 150.
I have a Helix 12 and when I start my boat it shuts off and has to be restarted. I ran new wire straight to the starting battery. Battery starts motor just fine. Any ideas?
TIA,
Mark
I went to upgrade my motorguide and when I looked on the side it has a 24/36 switch. Has anyone ever seen one like this? If so what year and thrust you think it is?
Tree limb broke off and landed on my parents deck boat. The top cowl was broken. It was a 1993 120 Rude. Does anyone know where I could find one or can they be fixed?
pastormark187@yahoo.com
...
Anyone use a troll perfect on a motorguide tm. Just wanting to know if it takes the slope out of the shift?
Thanks for the advice. Did what you said and it works great now.
Thanks I will try that tonight.
My tach is doing weird things. When I start the motor it goes all the way to the right and stays there. Motor runs and starts fine. If l turn the motor off and turn the key on it will go back down...
My tech is acting weird. When I start the motor it goes all the way to the right. Turn it off and it goes back to 1000. Turn key on it will read 0. Any ideas. Motor runs fine and idles good.
C/O Marine
Kimberling City or Bass Pro resort by the Dam.
Got it fixed. A bolt came loose and block the lever. Yea