I had mine for 11 years and wish I had it back. It's a good boat as long as you take care of it with maintained and wash it down after use . Good luck and enjoy.
Type: Posts; User: larry crouch
I had mine for 11 years and wish I had it back. It's a good boat as long as you take care of it with maintained and wash it down after use . Good luck and enjoy.
You can call them and tell them what your going to do and all of them are very knowledge on there equipment. There phone number is as follows 334-514-7147. I just ordered one for my transom also....
My dowco cover leaks like no tomorrow and the other thing is that you receive no instructions on how to trailer so when trailering the cover is glued to the windshield . The poles suck also. So if...
Now that is thinking outside the box and look's like an awesome setup. How did you anchor your bolts in if you don't mind me asking? Looks really sturdy and bet you don't get no arm sliding down...
My Dowco leaks like sieve and has since day one . I've resealed it a couple time and it still leaks. Thank god it doesn't rain that much here. The other problem is getting the poles to work correctly...
Just replaced my oil pump and your right it would seem as though mercury would step up and fix the problems. I guess that's how they make there money! Now there saying on the new motors that the...
Call custom tint and mold because they are a lot cheaper than bass pro. There phone number is 870-367-7083. By the way bass pro here in texas uses this organization but bass pro will charge you for...
I live in texas and also had an 884 savage and a 150 efi and I ran a 23P 4 blade 99% of the time and the only time I changed is when sent my prop in to get worked on. Had no problems. I have a 200...
Mie also seeps in the lower cowl. It's just started about a month ago and the mechanic said I could still use it for a little while until it really seeps or blow's. Talked to a guy at the ramp...
II have a 200 pro xs and now have a small oil leak also . What doe's a new oil pump usually run? My engine ser number is 1B865945 and it's a 2012. Thanks for your help here.
Some one asking if the oil ? Sorry to hijack the thread but I have an oil pump leaking and the mechanic said it an O ring and said a lot of mercury's have that problem. I guess the question is why...
How many has had to replace the oil pump on the motor? From what I've read it seems to be a big problem and just wonder if mercury is going to fix the problem with the seals thats on the pum? And of...
Yes check you caliper. I had to pull my wheel off and check it that way and the caliper was not on correctly and after readjusted it it turned out just fine, But I had to take the wheel off first.
You said you had the bearings repacked and you got home and added more grease? Why did you add more grease because if the guy repacked the bearings then they shouldn't had to have more grease added...
Dubtee: I too have a tandem axle trailer, but I can move my trailer with the Trailer Valet , I just pull it out enough from the garage wall and then proceed to turn in to the straight angle and crank...
I got a dowco cover for trailering and this thing leaks like a sieve and I've only used it four times and of course it rained every time so I spent some considerable time cleaning the inside and out...
Trailer valet is the way to go and you will not be unhappy with it. You don't have to jerk your boat to turn or pull forward because the crank will do your heavy work.
Thanks for all the help and as you said it worked just fine. Thanks again for your help.
Look at trailer valet and also look at northern tools they used to have the double wheels jacks also. But really look at the trailer valet trailer jack to me its a life saver.
I can not get my way points off my two depth finders and when I put a new sd card in it automatically loads up all the old waypoints on the new card. Cannot figure this out and have spent so much...
Thank you for all your help.
Look under the driver's console as a start.
I have a 25 4 blade prop for my 200 hp merc and it just doe's not fit the engine due to the rpm's are in the 5000 area before you barely get on plane? It just doe's not feel right and it really don't...
What 4 blade prop would you use in rough water?
shane23ss: I'm trying to figure out your system on finding ditch depth and really how are you finding ditch's on the lakemaster card. Iv'e went down to .025 and up and still not seeing what your...