Search:

I did happen to watch a YouTube video of a kid changing out a oem motor and it also had the black and white wires. White wire would have been the blue wire and the black wire would be green.

Ok I did not think it would really matter. I’m the same I have never see the white and black wire either. The replacement that I got was green and blue. And that’s all I have ever seen. I got the...

Long story short, original oem Yamaha tilt and trim motor went out on my 2005 hpdi 225. Got an aftermarket one off eBay and all was well. Well it lasted a couple years and has now gone out . I kept...

Penzoil here in my hpdi, no issues. Hell of a lot cheaper as well. Best part about it any Walmart has it if you are out and find yourself needing it.

Ngk

WOW

I’m sure they would probably all work fine. One would think if it’s a Yamaha dealer and they work on the motors they would use Yamaha oil. Just throws me for a loop when I had bought Yamaha oil and...

Well I went back to dealer to find out exactly which fluid my gear case took. It takes the yellowish fluid like what I was sold. The bluish green that was in it was mercury brand fluid. That was put...

My oem went out, ordered a aftermarket online. Works fine, but I did take my oem apart and all it needed was new seals and brushes. I rebuilt it and have it as a spare if the aftermarket one goes out.

When pumping the primer bulb, hold upright with arrow facing up.

Change both low pressure pumps, all fuel filters and water separators. New set of plugs and go test it out.

Since mine has that bluish green in it can I put the yellowish oil in it and be ok? I let it drain all night but there is not a way of getting it all out. I don’t want to screw anything up that’s for...

Ok thanks, I’m thinking the one the guy sold me yesterday was wrong, it’s the yellowish clear oil, what drained out was bluish green. And I also had a small amount on the shelf. I didn’t put anything...

Both are Yamaha

Stopped by the dealer and asked for a quart of gear case lube for the 05 hpdi 225 lower gear case. Guy hands me a quart. So I go to drain old fluid out and it’s greenish blue. When I go to put the...

If you do decide to purchase said motor. I would go through it and replace every fuel filter on it. New plugs, basically do a complete tune up on motor.

Thanks guys, I’ll look brucato up and send them off.

Where is the best place to send a set of injectors off to be calibrated and checked? Motor has around 500 hours and I’m doing all the filters and tune up. I don’t think they have ever been serviced...

Thank you yam!

Can someone tell me the part number for the complete water pump kit that has all the gaskets and parts for a 2005 hpdi225 vz225trld motor? Thanks

If I remember right I had around 400-450 in mine. Replaced everything except the rotors. Very easy to do if somewhat mechanically inclined. The calipers were trashed, brake lines rusted out and...

Put a bolt through the sliding part of actuator. When I bought my skeeter previous owner had done this. I wasn’t fond of it so I replaced the actuator, brake lines, calipers. Brakes worked excellent...

I have seen a couple different methods on bleeding. One is holding the release on bottom of actuator and pumping several times and then holding while cracking bleed screw. Second is just pumping it...

45 sounds about right. Did a live check on my 225hpdi and torqued to 45

This was a jcase fuse. Nowhere to probe it with a test light.