Open the remote unit and look at where the back of the rubber buttons make contact on the circuit board.
Clean all those contact points with a clean new pencil eraser tip.
Wipe the rubber...
Type: Posts; User: MikeF
Open the remote unit and look at where the back of the rubber buttons make contact on the circuit board.
Clean all those contact points with a clean new pencil eraser tip.
Wipe the rubber...
:thumb up2:
Missed that check.
2004 era probably has an open atmosphere trap type vent.
Think mud daubers and such.
If the vent for one tank is blocked/plugged, it may draw fuel only from the other tank, if dual is selected...
Would be tough to do if you were away on a fishing trip and your single 24 volt battery malfunctioned.
Or your dedicated 24V charger malfunctioned.:wink:
Look at the bright side.
The LVS34 will probably drop in price like the LVS32 did after the LVS34 was introduced.:smile:
Good to know.
Thanks for the quick reply.
:thumb up2:
The battery fits in a standard group 27 tray?
If the feet fit inside a group 27 tray, then the case must be slightly smaller than a standard group 27?
Edit
Went to the Drewcraft site.
The...
A little trick.
Make the connections as shown but get a toggle switch with an indicator light.
The toggle switch will require a seperate ground wire to the battery so the light works.
If...
If you enjoyed the Turbo Encabulator.
Longer, but brings the history full circle.Lol
https://www.youtube.com/watch?v=5nKk_-Lvhzo
Sounds like a takeoff of the Turboencabulator.
https://www.youtube.com/watch?v=Ac7G7xOG2Ag
Distance is from the transducer.
Where you have the transducer mounted on the boat may account for the illusion.
Crappie fishing with up to 16' poles has been spot on.
How accurate at 20+...
Notice the placement of the comma in the above sentence.
Discuss
(Taken from a Mustang model MD3183 HIT hydrostatic inflatable PFD product description)
They would need to be since they are a touch screen.:wink:
Pre "Flux Capacitor" ignition.:laugh:
Those of us that had mouthed off to Mom and lived, knew what you meant.:laugh:
See if this vid answers your questions.
Good Luck
https://www.youtube.com/watch?v=XT0RKDGgDm8
Does your vest look like this?
https://www.youtube.com/watch?v=eYzDeyK8_gc
If it is a bobbin type, you can't see the date on the bobbin unless you open it up.
Disassembly won't trigger the...
They interpret by the manufacturer who made the unit.
The reason I called Mustang direct.
I always have a regular vest for each passenger in the boat in addition to the Mustang HIT models,...
If there is a zerk in the end of the axel, the wheel/hub needs to be rotated as you pump in new grease to grease the hub properly.
The old grease will be pushed forward to the front of the cap...
yam911
Interesting analogy as my first impression was that it sounded like another word salad from our current VP.:laugh:
Expires last day of 2024, according to someone I spoke with at Mustang when asking about their modules and dates.
Not sure which manuf. you have
Do you have a metal cap with a smaller removable rubber plug in the middle and a zerk fitting on the axle end?
Not everyone can pull off the look, especially in the white.:smile:
There is always one sharp pencil in the group.:wink:
Can the date of manufacture be read in a Minn Kota charger serial number?
Thanks