Search:

Thanks for the replies. Im not sure if the UFP brakes are aluminum or not, but these tie down ones are, and they are soft!! I stripped one with what I would have thougth to be minimal force, which...

I have searched previous threads but couldnt find my answer.

I just replaced my brake calipers (tie down 46304). They were shipped with bleeder valves in both spots on top. The way ranger runs...

Everything mikesxpress said.

It doesnt take much for the flappers to not lose properly, if there is any sort of sand, or any crap in there the water can leak out. Usually a good flushing and...

forgot to mention about location....on my 09 z520 I removed a false deck that holds a battery. It will be located in the plumbing system between the intake and the pumps. There will obviously be...

I originally thought about doing a new cable, but the more I looked into it I decided that dont fix what aint broke. I do send some lube down the cable and worked it lots and lots to get it real...

Also, a good rinse and cleaning could help you out. I was having similar issues and took the valve out and gave it a scrubbing before buying a rebuild kit, and when reassembled and it worked as it...

X19Indy, Thanks for the offer but the 70lp unit wont fit properly in my tongue designed for the 80lp. Appreciate the offer tho.

I will call Ranger and talk to them again. Maybe I didn't explain...

CatFan, Thank you for the reply. I found a repair kit that is basically everything needed to replace the actual brake actuator and components and not the coupler or anything to do with it. That may...

Thanks for the reply. I have looked at the top mounted bolt on units, my only concern is that one of the bolt holes will line up in a spot where the current tongue already has a bigger hole for the...

Time to dig up an old post of mine. I am still dealing with this. I thought I hade solved the problem by bleeding and doing some simple repairs. However it is completely done now. Leaking from...

I have a 2009 Ranger trailer, and the tde actuator is leaking and needs to be replaced. I am having trouble finding one to replace it. Ranger told me to call dexter axel as they do all their...

Had same thing on bottom of my new to merit when I bought it....when I was working in the bilge, I found it, was a through hull that previous owner snipped wires and just left in place to seal hole.

Haha thanks

4th on the way???!! maybe you should consider an alternate use for the tubes??? hahaha good luck look forward to seein them

Right on, that's cool!! PM me some photos of how they turn out??

Aric, who did u go with? Being in Ontario as well I'd be curious...

Thanks for the replies....all wired up....truck receiver did have a diagram, trouble was figuring out which wires were what on the trailer.

Hey guys,

My five pin trailer connector is on the outs. I am looking to replace it with a 7 pin round plug to avoid using the adapter to fit into truck socket.

I was wondering if anyone has...

I think it may be in one of the maintenance tips at the top of the page

Thanks ranger519vs,....I figure that is the best way to go. Only thing I was trying to accomplish was to find one closer. Being in Ontario, getting stuff from ranger shipped up and across the...

Thanks for the responses. I have searched and searched and called the manufacturer (tie down) and the lp80 and anything to do with it are no longer available at all. Can't even get a single part to...

Thanks Comb. My next question is, the lp80 has a different bolt on pattern then any other actuator. Do I just drill out the tongue in the appropriate locations for whichever unit I go with? Or do...

Hey guys,

I apologized and I know this is not a new topic but I'm hoping someone can help me out. I have a 2009 Z520 that rides on a tandem ranger trail. I am looking to replace the brake...

Sounds like something in the motor itself is not working properly. Sounds like maybe a relay as old timer mentioned. Could be any poor connection in there causing it to continuously draw power. ...

Are you sure it is the motor drawing from the battery? Usually the electronics and pumps and whatever else you have hooked to the cranking battery are the culprit for a drained battery. I don't...