https://youtu.be/cdy18XCrZLc
Rudolph Repairs
Type: Posts; User: Savage
https://youtu.be/cdy18XCrZLc
Rudolph Repairs
What type/brand of reeds are currently in the motor?
Steel or carbon fiber?
Need to know WOT RPM's with the boat loaded the way you normally use it to accurately determine the prop pitch for YOUR boat.
In the FAQ section at the top of the forum page.
"Mercury Component Cocktail"- for EVERY tank of fuel, whether or not your fuel contains Ethanol: (Chemically, this works much the same as the...
No.
i should have said delete. I replied to the wrong post.
mistake
It means the seals are leaking and need replaced.
In hull transducers are able to read depth at planning speeds, when structure scan transducers might be out of the water.
Waypoint "Sync" and Transducers are connected through ethernet. Check to see if transducers that are not connected to s specific unit are able to be seen.
:thumb up2:
http://i38.photobucket.com/albums/e102/21xdc/MercRacingFatShaftHubKit840389KO6.jpg
What boat?
Post picture of what lower unit you have.
I run a Solid Hub only on my 300XS with a Gen 2 lower unit.
Quicksilver DFI oil
Quicksilver Premium Plus
The RED Loctite is going to eat away at the plastic. The Red, Blue, and Purple Loctite is not compatible with plastic.
Because you asked this question at the end of post #4 >>>>>"Where would you suggest getting discontinued parts from"?
Good Luck to you Sir
Just an FYI that there is a New update 1.3 on the Lowrance website for the Ghost trolling motor.
https://www.youtube.com/watch?v=jtN-ddTy-6I
https://www.youtube.com/watch?v=j5rDcoHq9gA&t=183s
Try the "parts wanted" boards
Try the "Swap and Sell" boards
Try the "Triton" boards for people with used gauges
Same size as a normal tire valve
Click on this >>>>> Low oil alarm.
Temperatures at idle should be between 120*-130*
Thermostats control this temperature.
If you cant find a new pick-up I bet the local Mercury dealer might have a pile of complete tanks from repowering to 4 stroke.
From the FAQ section........Click on this >>>>>Considering buying a used Engine?
Does the OLD coil from #4-cylinder work correctly if you install it on a different cylinder? If so then we can determine that it's a possible wiring issue.
