Search:

Hi all

would anyone know if the latest update has addressed this issue?
thanks
Stats

thank you

One for the guru’s.

I have also posted on the E-tec forum asking the same advice.

I have a G2 using an ICON 4.3 gauge with the Evinrude Johnson GPS Antenna Kit as part of the system.

My...

thanks - here's hoping it on a to do list somewhere some time

Hi all

I am looking for advice as to whether anybody has come across this before and whether there is a solution.

As background, from memory, the transducer was originally fitted with a...

Are you confusing the external oil tank with the VRO system? these run straight fuel with no oil mixed with the fuel. the oil is directly injected onto those parts of the engine that need it and the...

Were you able to find the cause of the issue? I am keen to find out as I am interested in jumping over to a lithium battery

I am looking for some feedback on the attached AIRMAR test report on a B75M.

It did have Raymarine connector that I changed to a Lowrance blue connector.

I was able to send the transducer...

Hello Team.

I am reaching out for some help

After receiving ‘professional advice’ from a local retail expert I bought a B75M transducer which had a Raymarine head unit connector and was...

LOL - well I best keep a keen eye out for a second hand 140 or 150 - - personally I think they will be as rare as hens teeth

thank you - the splice would located within a cuddy cabin but I do like the idea of a splicer joiner kit.

so it doable and functional?

Hi all

I am hoping for some advice as to whether the following is possible, feasible or even realistic. I am been getting some conflicting advice.

I have access to an Airmar B75M that has a...

thank you

Hi all

I am asking the following for an acquaintance.

here's hoping some the 'more experienced' folk may be able to assist as to the operating RPM an max WOT for a 1990 Evinrude 115 hp

I...

By the way, the G2 fuel and oil consumption goes down if the top RPM is around 5500



yep Elgin e is right

- i also posted on the EOG pages

I went from a 15" pitch RX3 to a 19" trying...

just hoping he is ok.

JR19Most prop repair/modification shops will tell you it's easier to go up in pitch verses going down. Also with stainless steel you can only go up or down 1.

thank you - again more knowledge that...

will OCD suffice - the search for perfection when it is not necessary?

I appreciate your advice it has given me knowledge I would not other had.

at 17 i am 5950 - and would love to try a 19.
...

Hi all

some advice please on prop re-pitching as I think I will potentially end up between and RX 17 and RX19.

would anyone have information on whether it is easier to fine tune a prop from a...

Hi

the following photo showing the anti cavitation plate skimming the surface is considered to be the optimum motor height

fair call - and continue with the lead acid batteries

thank you - great info

my fitting dealer was spinning the line of 'it will rev out to 6100rpm - so seeing 6000 is great'

hmmm - not the advice of tech experts whose advice I respect.
...

One for Elgin

I was wondering whether you have any thoughts on the suitability or otherwise using a lithium starting battery with a G2.

I was thinking that through your previous line of work...

thank you for sharing the experience with the CMC product -it is stuff I would not have had the opportunity to find out about until till late - ie failure on the boat



thanks and will do

last motor was a 25"shaft and the manufacturer listed it with a 25" shaft though I had thought of the same thing - can not change it out now


Any thoughts on these?
...