I have a 2007, 4X4, 5.7L that I bought new. Would not buy anything but another Tundra as it has never been in the shop since new! I have put one set of front pads on it, set of tires, R&R...
Type: Posts; User: Skeeter Madness
I have a 2007, 4X4, 5.7L that I bought new. Would not buy anything but another Tundra as it has never been in the shop since new! I have put one set of front pads on it, set of tires, R&R...
My wife and I went down this week (Oct 8-11) and had pretty good luck/success. We averaged 12 browns a day with an avg of 9 keepers. We were able to catch them early and late only and found them on...
Had this happen to me several years ago at an Exxon in CA. I returned to the station with the bill from the Dealer for the repairs and they paid in full. I may have gotten lucky though. Good luck.
I have one I might part with. It came new in my boat ('06 20I) and it had one corner mount hole broken out and Skeeter replaced it free under warranty and allowed me to keep the old unit as a spare....
Had a good 3 days of fishing. Found the fish in 20-30ft of water early and late, backing off to 40-45 as the day warmed. Caught a limit of keeper small mouth each day on jigs and a few on crankbaits....
Think I have it resolved now. Installed the new seal from EZ Loader and it went right in. As well, I noticed the last replacement seal was cut when I removed it. I found the problem...there was a...
Decided I would clean and lube my wheel bearings. Purchased new grease seals from NAPA. Got the job done, and after a short trip to check everything out one of the BB's was flat indicating no grease....
I cut a small piece of a rag and tied around mine. No longer leaking on the tank, but it still seeps. OBTW, this is my 3rd Yamaha and all have had the same problem.
Do you have Command Link? If so, drop me a line and I'll share some tips. If not, I agree with the others.
Unfortunately for me (the big D), I must sell my boat. Al said it will take a couple weeks to get it posted, so in the meantime, if anyone is interested, please drop me a line for details.
Sounds like they have really dumbed the boat down. Not sure what will make it their flagship boat if it has the ZX features. I'm not saying there is anything wrong with a ZX, but my IClass was much...
Same thing happened to mine. The Dealer had put a really cheap starting battery in it that lacked the necessary amps for the engine. I went to a big, high CCA rated battery and my problem went away....
That sounds right to me. I watched the Yammie Rep adjust mine and he used a meter to measure voltage (TPS sensor), not the tach. When he finished, mine is at 900-1000 at idle, 750-800 in gear.
I've had two Skeeters and both were/are great boats (including my current I Class). No problems at all with my previous TZX 190, and Skeeter stepped up immediately to resolve the couple issues I had...
When mine wants to be fickle, I give it a little gas and she lights right off. Usually happens in really cold weather. I have learned that I have to pump my bulb really hard if it hasn't been run in...
I have Command Link in my 2006 20I and yes, it was an option. If you have it, you will have the fuel management system (GPH, MPG, etc) in your tach gage as well as other electronic features (clock,...
First, it is absolutely critical to follow the break-in exactly as described in the Owner's Manual. Otherwise, it's the same as any other engine (winterize, fresh fuel, plugs, LU oil, etc.).
I sent mine down plastic wrapped and received it back wrapped, but it was a mess inside and out. As well, my motor toter never came home though it left with one. But the results made the...
Not hard to install if you have a means of holding the engine as it will have to be supported/removed from the JP. You will also need longer bolts.
Do you have Command Link in your boat?
Here's the Skeeter numbers: http://www.bbcboards.net/zerothread?id=6633. Good luck with it.
Bustin:
Call Darby at Skeeter. He is the one I coordinated with and he was great. OBTW...my middle son lives in Ft. Collins as he is about to enter his Senior year at Colorado State. I can't wait...
When I had mine done last year (in TX by Skeeter), they were only allowing one shop besides the factory in the SE to perform the change. They add hook to the transom. Mine is one of the early '06s...
Bass Pro Shops has them for $6 a set.
If you have a GPS that logs trip data you should be able to measure the amount of miles traveled divided by the gallons of fuel used and get in the ballpark. It will likely by in the neighborhood of...