Search:

Yes. When disc brakes are applied, the piston pushes one brake pad against the rotor. At the same time the piston causes the caliper to slide in the opposite direction in order to pull the other...

I had a glass fuse go out that looked good to my eyeball. An ohm meter showed it was blown. Must have been under the metal end somewhere.

I use 1" Velcro straps myself. Simply wrap around cover and graph. cheap & effective.

Friends are using Boat EFEX straps. BoatEFX Cover Trap – BassFishin Electronics, LLC

I have a 2010 21 iClass, Ghost and Active Target (1). I do not use a wedge. Never gave it a thought. Don't think I am having any problems with images. I'll keep an eye on this post to maybe learn...

Yay! it is fixed. There was a lot of air in the lines. After bleeding the system I have no more skidding or locking up of the brakes.

Replacing the actuator did not fix it. Neither did changing the tongue height up or down. I am taking it to a different trailer shop later this week.

So now you get to figure out what caused them to blow.

Well....the trailer shop mechanic decided to lube the actuator to see if that would fix it and "save me some money". Then they couldn't read my phone number so the boat has been sitting since Monday...

Thanks NoCal. I am leaning that way the more I read about brakes. The calipers, rotors and pads are new...installed in Oct 2023

if you can't find it, try pool noodles. Jacob Wheeler uses them as well as others
or

An Easy Livewell Trick for Better Fish Care - Wired2Fish

[QUOTE=billnorman1;13414864]Let's see. You hit the brakes. The truck slows down. The trailer pushes on the tongue. The trailer pulls back from the truck which takes the brake pressure off. The...

I believe it is a A60. We are going to the trailer shop Monday. I hope it is an easy fix. I have a grandson who wants to go fishing during Spring Break.

I'll look for that but don't remember seeing one unless it is inside the tongue tube.

Thanks for the suggestion!

Disc brakes on front axle.

I would guess 60 lb for that size lid.

This is posted in the Skeeter section also.

I have a 2010 Skeeter iClass with a Easy Loader Skeeter trailer. I had to replace an axel because it was bent. The brakes on my old axel were not...

I'll post this in the trailer section also.

I have a 2010 iClass with a Easy Loader Skeeter trailer. I had to replace an axel because it was bent. The brakes on my old axel were not giving me...

The best way I have found to get hoses off is NOT to pull on them. Believe it or not that makes them tighter on the fitting. Get something that you can get between the end of the hose and the...

I am not an electrician, so what I say is only what I think I know about household electricity. If the GFI on your outlet trips as soon as you plug in the charger, I think there is a problem with...

We had a guy in our old shop that would spin balance tires...but...he didn't use the part of the Hunter that mounted on the wheel...just the spin motor. He placed his hand on the bumper of the car...

mine came from Skeeter. They were stupid expensive, but my OCD got the best of me.

I have found that on my map cards there are some lakes that do not have contour lines displayed. Comparing my cards with friend's and they are the same. Some lakes just don't have depths recorded...

Yes, the Lives have 2 Ehternet ports on each unit. "More better" than having just one on the FS.

Bdogg'

To answer your question, aurora covers can be reached at https://www.auroracanvas.com

I'd rather rely on my "kill switch" and my auto inflate vest. I never (well mostly never) use constant on switch with my trolling motor, and I ALWAYS wear my vest.
Hopefully "when" I do go into the...