Clean carbs. Check that reed valves are still intact.(I’d install carbon or fiberglass reeds at this time as well). Hook up timing light and confirm throttle advance is set correctly. If you have...
Type: Posts; User: dannyman
Clean carbs. Check that reed valves are still intact.(I’d install carbon or fiberglass reeds at this time as well). Hook up timing light and confirm throttle advance is set correctly. If you have...
Rebuilt pro v 150 myself last year. Has about 60 hrs on it now and runs great. I’ll echo that, THE ISSUE THE ORIGINALLY CAUSED THE PROBLEM MUST BE FOUND AND FIXED. Preventative maintenance is key....
Does anyone have access to the factory wiring diagram for the nav/anc light circuit? I am installing a bow nav light switch (dpdt). A switch was there previously but never worked. I would like to...
Nope. I’ve since ran it at 5in p2p, with myself and a buddy it was having a hard time getting on plane and would drag the starboard talon which made the boat ride heavy to port side. Gave up and set...
First off sorry for this post, I know this has been beat to death. Ive been running this boat over a year now (h56, 150 pro v, 6” cmc manual plate, sandwich talon bracket adds another 1”, Yamaha m23...
As far as restoring a shiny finish, I’ll side with rocket man. I’m not familiar with the backtracker trailers, since I used a repurposed rangertrail. Oxidation of aluminum is normal. In aviation we...
I replaced the bench seat on my H56 with the 4 piece seat set from bassboatseats.com. It took some fabrication of brackets to fit them, but well worth it. Very comfortable and good quality seats....
I have a ‘97 pro-v 150. Carb cleaning isn’t bad, just a little time consuming. If it hasn’t been done in awhile it would be worth doing just for piece of mind. Primer bulb should stay firm while...
I went through the same issue a few months back, chased my tail quite a bit. Ended up being broken reed valve for me. I cleaned and rebuilt carbs a couple times. Adjusted timing. New fuel...