Search:

What’s a rough estimate for a transom replacement on a 180 combo and how much if stringers need to be replaced too. Would prefer composite over wood. I live around Oklahoma City.

Confirmed my fears today when mounting a new transducer that the wood in my transom was wet. Let me disclaim that I know it won’t make sense financially but I have various reasons for wanting to...

I replaced the leaf spring for my 1998 procraft 180 combo’s trailer but the old springs were 26.5 inches long and no shop I went to had that size so instead I bought 27s and hammered the shackle on...

Nearly all my gauges on my Procraft 180 combo with a 150 Mercury are shot and I’m looking to replace them. Will any set of outboard gauges work or are there certain sets I should stick with? Also is...

My 98 Procraft has some worn trim foam at the ends of the boat near the ladder that need replacing. Does anyone know what I can replace it with? I thought about Sea deck but it’s way too thick and...

I’m replacing a bad leaf spring on the trailer for my 1998 procraft 180 combo. Do y’all know the torque specs for the nuts when I put the new springs on or at least a ball park number?

I’m planning on replacing the fuel sending unit in my 98 180 combo. Does anyone know what size/type of sending unit I should order for it?

Today I changed the water pump impeller on my 150 hp Mercury. I put the engine in forward before I dropped the lower unit. After having a heck of a time getting the lower unit back in, I started the...

Yes, the shaft seems to wobble and shake even without the prop and pin in. That’s why I replaced the whole armature because I just thought the shaft was bad

I have a minn Kota I pilot power drive 70lbs. A month ago the motor accidentally deployed while I was on plane and it shredded the prop and the gear box. I replaced both the prop and gear box but now...

Anyone know if I can use the cowling from a 150 hp efi mercury outboard of a similar year on my 1998 carbureted 2 stroke mercury 150 hp? My current cowling is extremely worn and faded, but I saw a...

So I should disconnect the wires from the old receptacle and connect two of the wires to the positive and negative wires of trolling motor and run a jumper at the batteries? And I should just ignore...

I have a 98 pro craft with a 12/24 motor that connects to a 3 bring outlet. I’m upgrading to a used 70lbs thrust minn Kota with ipilot that is 24v. The previous owner of the minn Kota had it wired...

I recently bought a 1998 procraft 180 combo with a 12/24 motorguide trolling motor. One of the TM batterie was missing so im not sure how i should have the wires connected to both batteries once i...

im looking to find a hub assembly and leaf springs for my procraft 180 combo trailer. Unfortunately it looks like the trailer company has been discontinued. Does anyone know the measurements and or...

im looking to find a hub assembly and leaf springs for my procraft 180 combo trailer. Unfortunately it looks like the trailer company has been discontinued. Does anyone know the measurements and or...