I put these on all of the zirks. You can get to the equalizer ones really easy without modifying any grease gun.
547971
Type: Posts; User: Brennan1233
I put these on all of the zirks. You can get to the equalizer ones really easy without modifying any grease gun.
547971
K71-652-00
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
This is what I put on my 2022 Z20 - the only "popping" I have is the boat on the boards when turned...
BassBoatTech for both console and bow. Vertical double stack on the bow.
546337
What is your installation depth setup on your unit? The higher the install depth setting the more trash/clutter/surface water shows on your actual display.
Mine starts to walk at 68 also. It settles down some with the P2P around 3.25 with me solo, full tank and one livewell. This number varies a decent amount with how its loaded. (2nd person/gear, full...
Forgot to add that I have a 12" total setback that includes a 6" Atlas that they would be attached to.
Trying to get a feel for what people have been using on the Nitro boats. My ideal setup would be the 2" setback with a 4" rise (to maximize depth) but my concern is splashback when getting on...
Agreed, I usually take a stiff bristle brush and fluff the carpet up along with wash it with a hose to get all the rocks/sand out. Mine does this really bad when I fish sandy water (river),...
That is what mine was modeled after design wise. I couldn't justify the $600 when I have about $100 worth of material invested. I was also worried the "tray" wouldn't stay put in rough water, I have...
I agree with the tackle management side, I have a 2022 Z20. There is so much space above the 3700s so I build my own slide storage. This isnt a fun task because the main rails/box is tapered. ...
Same, I just dropped mine off yesterday to go back to them. Sent them pictures and videos and there was no hesitation on their side asking for it back.
I purchased a JP mount and actually placed on other side of jackplate due to the same issue. This tucked my transducer under like BRNut is talking about. https://www.premiersonar.com/...
Same, mine was horrendous at the 20hr mark. I actually changed it at 20hrs and again 23hrs due to the fines. Showed my dealer a video of the first change draining and he sent it off to mercury.
...
Not sure what model/year your boat is but mine is the opposite. 2022 Z20, pulling the red nozzle activates the pump out feature for the livewell.
I have a 2022 Z20 with double stack 12" bow and double 12" console. I can leave all the electronics on (minus windshields) and the cover "fits". You have to really work to get certain areas below the...
Agreed 100%, actually having this discussion with my brother. I have a 2022 Z20, some very minor fit and finish issues with gel coat etc if you really look. I definitely just completed the Dexter EZ...
I too just did the full EZ Flex kit, less than a year old the plastic bushings were worn thru.
Kit wasnt the greatest/easiest to put on my specific trailer but so far so good. The spare tire is...
I have retractable transom straps that are usually one click past snug, and a ratchet strap on the bow to trailer about the same tension.
My dad has always made the comment that "on the trailer...
Yes and yes on your two questions, the bolt is missing. Fortunately the main pin did stay in and needs to be addressed immediately before future use.
Dont know what year yours is but i have taken the drivers seat out of mine to add the adjustable slide. The same one that comes on the Z21 model which Basspro told me wouldnt fit.
...
Same, I have tools in waterproof bag, ropes, extra rain suits, removable console covers etc in these bins. I typically like to leave the back two compartments open for people who fish with me so this...
Soapy water has been useful in the past for this along with the prior recommendations of force.
The laser props (same 22 & 24p) did not work for me at all. I tried with and without plugs and the mid to low 40s is what I could get without going over 6200rpms. I landed on a PowerTech PRO3 in the...
https://hennesseyoutdoorelectronics.com/products/h-o-e-humminbird-msi-ghost-transducer-bracket
I had a 2007 175txw with a 2007 90hp Merc flashed to the 125hp. Obviously no warranty concerns since I purchased it second hand. I put a 4" atlas on it and didnt notice any higher nose stance in the...