Looking for any info on any good crappie lakes in or around Northern KY. I have had some success on the Ohio River and some creeks around the Ohio River. Any hints at which lakes may hold some...
Type: Posts; User: Ak47soulja22
Looking for any info on any good crappie lakes in or around Northern KY. I have had some success on the Ohio River and some creeks around the Ohio River. Any hints at which lakes may hold some...
farmers festivals in Aurora Indiana going on this weekend I believe
I'll be launching out of Craig's tomorrow AM, I'll let you know if I have any luck.
I was there this Sunday and there was a tournament going on. I believe they started at 7am but not sure who to ask. I didn't fish in it just talked to a few anglers who was.
As the title states, I had bought and installed a new BRP Primer Bulb, in April of this year with new fuel lines. I noticed yesterday afternoon that the bulb is leaking where the fuel line connects...
HydroDip it. There are multiple companies out there that do it.
Thanks Fred for the direction. Evinrude Johnson OMC 0177107 - Gauge Assembly, Tachometer, System Check is what I will be on the look out for.
Issue one: I am having a issue that I would like some guidance if possible. When I turn the key my Tachometer beeps 4 lights blink, once the motor starts, the system check on the tach goes again....
:beers: To Fred.
As the title states, I am taking my Pop to Brookville Lake tomorrow early AM. I planned to stay on the southside of the lake launching from Templeton Creek. In my research, I have found the water...
John and Bill, I appreciate your assistance. The least I owe you is an update. I did away with my jumper for the two batteries, also wired the batteries correctly to the plug and receptacle. While...
Im starting to think its my wiring from my battery thats causing the problem. Every way I tried to configured the wires to the plug and the receptacle and it still tripped the breaker. I tried a...
Bill per your direction, I took the wires off the plug and plugged it it (it tripped the breaker). SOO let's try my A,B and 1,2's :).
My wires from my trolling motor are labeled -1 and +1, and -2...
I will triple check my work and report any findings. Thank you John and Bill for your help thus far.
The receptacle A+ and A- and B+ and B-. The way I currently have them connected they are corresponding to neg and positive. I just checked the wires and switched the positive wires to see if I had...
Thanks Bill, I double checked the connections and seems that everything is in the correct position. At the plug i have the neg wire in the -hole for the plug. I also have the positive cord to the...
Update**
John I checked the male plug and it was toasted. The jumper connection was fried, I replaced it. Also, I checked the receptacle, took the connections off and cleaned them. While checking...
I have the the 4 wires at the receptacle. From what I am understanding is I may need a new receptacle and possibly a new male plug. Is that correct?
I will dissemble the male and the female ends for the plug. I thank you for the input Bill!
Thanks for clarifying that. I re-did my readings and the input located closest toe was 5.97 and closest to the heal was 12.73.
I am thinking if it is the control board (100-150 bucks) and the armature has a a wobble (140-180 bucks) should i just look for another trolling motor?
Rodger that for the "don't tune". I have checked the readings from the control board. Please see pictures below.
http://i155.photobucket.com/albums/s308/ak47soulja/trolling%20motor%20reading%201.jpg...
From the receptacle (with the motor on constant power 30/40) I get a reading of 13.7 on one side and 13.5 on the other. I did try to "tune" the motor by loosening the 2 8mm bolts and turning the...
I am having an issue with my MinnKota Maxxum 70. It seems to be running at half the speed as normal. Example 10 speed rotates like 1 every 3-5secs and 100 speed seems to be running like it would on...
Great job @bassnailer