<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stratos19xl »</TD></TR><TR><TD CLASS="quote">That might help me if I knew what the TPS is...
Type: Posts; User: Chevy_Ranger
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stratos19xl »</TD></TR><TR><TD CLASS="quote">That might help me if I knew what the TPS is...
Filling: To properly check the fill, the trim/tilt rams must be extended. Raise OB all the way up (if you can't via the trim motor, then back off the manual release valve and with extra help,...
I worked for a while with Goodyear and I learned a lot about tires and how they work and how they are made.
Here is a question I put to a Goodyear rep one time. You have a trailer that weighs...
This is a tool I made a few years ago to remove the cap off of the Trim tubes on pre-2003 (sometimes 2004) Yamaha motors. I am showing it to you here so you can see how I made it. If you need one, ...
They put the impeller in wrong.
Thank you. My mom's family lived in Possum Holler. Her cousin is his mother.
My grandpa was janitor of the school in Dierks for 30 years. back in the 50's
Dexter Bean was his name.
He is a cousin of mine and I lost contact.
Please wear something RED on Fridays.
http://www.bassboatcentral.com/smileys/USA1.gif
Here is a quote from an internet page from a gasoline scientist.
"Higher octane will not burn hotter unless it contains more ethanol. The more ethanol in your gasoline the hotter it burns, and...
You need to order the complete repair kit from Yamaha. It has other parts that you will need to do the job. My parts come directly from Yamaha, but in your case I would use iboats.com at this...
I use to hold classes on fishing and how to do the basics. One of the hardest parts was teaching people how to cast a bait caster reel. I thought of something one day that I thought would help and...
The spark plug should tell you everything. Is it white, black, does it have metal frags on it. Most of the time, a piston failure is due to lack of fuel and/or fuel/oil mixture ratios. Make sure...
First of all this is not my idea, I saw it today on a boat I am working on
The owner wanted something quick and inexpensive to safeguard his stuff a little better than just the locks on his...
http://www.bassboatcentral.com/smileys/popcorn.gif
Trust me when I say that anyone can do this if you know the difference between a screwdriver and a monkey wrench. Don't pay to have this done. Save your money for baits and such.
First of all,...
(Was told to put this on here also)
Just read a thread about bearing buddies so I thought I would put this on here in case someone needs to know how to do this. I am going to assume you know how...
Club member had a problem like this and we all agreed that he should take the boat to the Marine board here in Oregon and license it there. It made things go a lot easier when the people could see...
I will call him and see if he is interested in any more customers. He is almost 70 and only does a few at a time anymore. Last year I only got 10.
I also use the Denny Brauer 3x plastics. They...
Never interupt your wife when she is yelling at you.
Never let your wife drive the boat.
Never let your wife back you down the boat ramp.
Never let your wife see just how much it costs to go...
I don't repair the new DF cables with solder. It can mess up the ohm rating on the line and give false readings.(per Lowrance) I use phone connectors and make the repair like a CAT5 network system...
Each one of these jigs has caught a 5# or bigger Bass here in Oregon.
I use 1/4oz or 3/8oz heads and Pro-Tec Powder Paint. I use 3D eyes in
yellow, red or blue. I use a variety of skirt materials...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TRCM »</TD></TR><TR><TD CLASS="quote">Only hard things about doing it this way are:
1) making...
I don't know where he is anymore. Sorry.
Just picture a side view of your gas tank. A clear tube comes out of the side at the bottom. Then turns 90 degrees up and ends about 1/2" above the top of...
A guy brought his bass boat into my shop for one reason. "That damn gas gauge is always wrong!" "I want something I can trust" "You have 2 weeks to come up with something" So here is what I came...