Search:

Alright fellas I have a question about BBC engines. I sure hope someone can help me out. So I have a 71 chevelle that I am about to do an engine swap on. I have a sbc in it now and am converting to a...

I've got an old Eska 9.9 and looking for a new Carburetor for it. So looking to see if anyone on here has one or knows where I can find one?
Thanks
Jon

Swapped the solenoid and made sure new batteries were hooked up well and 3 seconds later she was purring again! Thanks for the assist. Sometimes ya just need to bounce it off someone else so they can...

About to replace all batteries today. Used cables to make sure it had power too and no dice. Tried jumping across the solenoid and nothing. Pulled the solenoid and checked resistance with ohms meter...

1999 Evinrude ficht 225

I came out to start it for the first time. Hooked up water wings and 30 seconds
later it was humming along and then quit. I tried to restart it and not even a click of the starter.
I heard a relay...

What about the dumping ground area ?

So spur of the moment my partner and I decided we re going back to St Cair next weekend.. Yeah I know boats will be out along with stupid people. Anyway I have been about 10 times usually in the...

Yes I dropped a line in the Florida Club section but im sure not everyone there checks it so I'm throwing this out there to see if anyone has an idea.

I am headed to Destin area this weekend for...

I am going to be headed to the Destin Fort Walton area this weekend for vacation with he family. I don't care for the beach and my wife can hang out there.
I wanted to see if there was any good...

I am running a Renegade 4 blade 25p I think its 13.5 inch.. Runs about 5800 RPM.... I also have a Raker 2 3 blade that my 225 has trouble turning and I get about 5000-5400RPM
Can I adjust the...

tech removed the shraeder valve and added a different type port which stopped the leak. somehow the throttle position had moved and set the alarm. once re-set no other faults or codes etc. hopefully...

I was able to pull the hood off today and turned the key on. when the pump kicked in I looked on the side and gas was coming out of what appears to be a schrader valve. I guess that answered my gas...

Great Idea.. I think Fortunately and unfortunately the cold days are behind us. I did in the past put a little heater on it while before fishing my first event this year and it didn't help at all....

PDP... Power Distribution panel? Will cold solder prevent the fuel pump from kicking in? And would that also make for a check engine alarm to come on once it is pout under a load taking off? Sorry...

Thanks I may change the fuel pump to start just so that its done and maybe It fixes it. Im sure it probably needs replaced.. Unfortunately I cant get into a tech even to check for several weeks.. I...

Okay, last year when t was cod fuel pump didn't want to kick on. Once it warmed up outside, about 6 hours into m tournament it ran like a champ. a few weeks later it had an alarm that kept going...

Thanks fellas, Ill take another look.. I guess I'll be replacing some gears then... Probably a good time to add some new boca bearings at the same time...
I appreciate he advice

sorry.... baitcaster

Quantum Tour edition.. I forgot the exact model but almost just like my smoke reels too

Had a question and figured I would post it here to see if someone may be able to give me some insight..
I have cleaned my reals have one that I use quite a bit that still makes a noise even after...

I've got a trip planned to fish there Thursday Friday and Saturday and it looks like the Radar shows tons of rain and unfavorable east winds. I wanted to know if anyone had the status of the lake and...

i own a 1999 evinrude ficht. Recently bought the boat and changed plugs and water separator and it ran like a champ.. had it out 4 or 5 times and it has slowly started to lose RPMs and hiccup a...

I changed the fuel water separator itself . Not the in line filter. I just checked and the filter separator is full. And if I prime it any harder it leaks from the bottom of the pump and connections...

Need some help quick. So I changed and indexed plugs and and replaced fuel water separator. Primes the bulb and now will not start. Pulled a plug and no gas on it. Do I need to somehow bleed the...