Exactly like Flynn
Type: Posts; User: exttremeparadox
Exactly like Flynn
Sending prayers your way, I'm so sorry for your loss
We've had the Jasper L-shaped sectional sofa from What A Room for 2 years. The upholstery has held up well to daily use and occasional spills. It's easy to clean, which is a big plus for me because...
Sorry for resurrecting this thread. Can't find another one. What to do if the stains are old and products like Goof Off don't help?
Thank you all and especially yam911 for the pic and explanation of the system!!
Forgot to mention: 2003 OX66 Yamaha VX250TLRB
Hi everyone,
I have removed my low pressure fuel pumps and installed a 10 micron Yamaha water separator, Relay and Carter Fuel Pump. I wired the the relay into blue wire of my VST High pressure...
All,
I am posting some pictures of a Fury 3 25p Propeller that I'm interested in buying but it seems to have cupping from re-work done to it. I want to buy it but I don't know enough about prop...
wcs69rat,
Thanks for your input. I will go back to my service manual and start over. I will check every system/sensor on the motor until i find the problem. I got super frustrated and had to pull...
Well this will probably be my final post on this motor. I have completed the following with no fix in sight:
- New Caps and Plugs; all coils check good
- New Low Pressure fuel pumps
- New fuel...
Forgot to mention that i took some advice and disconnected the switch by the shift linkage that drops two cylinders and checked and cleaned the fuel feed assembly just forward of the filter. I will...
I will check it out but my memory says 35/36 psi
Forgot to mention that i changed the Oxygen Sensor as Pro201 suggested.
I know i have been missing from this post for a while but i have been troubleshooting my issue as in depth as i can.
I ordered a used and calibrated complete set of injectors from BrucatoFIS.com....
My current setup is 3 80ah 27 series lead acid batteries for a 36volt setup and one 105ah AGM for the motor and electronics. My concern is the 3 50ah Ionics. My guess is that lithium's don't lose the...
Hi BBC,
I know I'm probably beating a dead horse asking the question about lithium batteries but just want to make sure before I spend a bunch. I'm considering the Ionic batteries in the following...
201pro,
Just wanted to give you an update on my issue. I cleaned the injectors and the spray pattern was beautiful. However, when i removed the O2 sensor and looked in the housing, it was blocked by...
Hello Everyone,
I'm having an issue with my 2003 VX250tlrb OX66. Here is the situation. On the water, when i advance the throttle to full (WOT), it takes almost five seconds for the motor to...
Hi all,
I have fabricated a bracket to install two Lowrance HDS Gen 3 grafts on the console of my 03 21XL Magnum. I have removed my Speedometer as that will be tracked via GPS. I had to remove my...
Ok will do and thank you for your help!!
Hi,
I have a 2003 Yamaha vmax VX250TLRB that is running very rough and is smoking while idle from what seems to be a rich mixture or fouled plugs (haven't investigated yet). I want to do a compete...
I figured this out myself. I also have no idea why people say that this is motor related, it's not. It may be a Yamaha Control Box but figuring out how to get behind it is BOAT related.
Hi all,
I have a 21XL Magnum and want to revert back to my hand throttle as i have a hot foot installed. I have searched the internet trying to find out how to change the hand throttle cable but...