Does mercury or you don have this rigging tube?
Tried sourcing locally and the pro xs engine side connection will not screw in. Either too big or too small. Seems like 2.5”-2.75” OD
pro xs...
Type: Posts; User: Check85
Does mercury or you don have this rigging tube?
Tried sourcing locally and the pro xs engine side connection will not screw in. Either too big or too small. Seems like 2.5”-2.75” OD
pro xs...
The 487?
You mind sharing some feedback on how it ran?
im looking for 25. Not sure if i can run a 27 how i prefer
Joe
yes i have the gen 2 gearcase. And will also run a surfacing prop
so your leaning towards the 8m0183487 hub kit. I guess the gamble of hard shifts is an application specific issue
One...
Bassman. Curious, does this particular 123 model work on a 4stroke as well? 300hp
Thats some fine southern humor
You were serious:roll:
bassman. Talk to me. You seem like you always have some unorthodox way of beating the $y$tem
alot cheaper also. Wouldnt be a bad way to...
I couldn't agree more Ranger-Jim!
As i recently was sourcing a used engine, Tim was top shelf, down to earth and full of valuable intel.
Even though i ended up going a different route, Tim was...
2018 pro xs 225 2 STROKE
2b535678 gen 2
1.25 shaft
read the faq’s, still have one, as rigging variables seem to be part of the pros & cons to each result.
>What is the mercury factory...
I will give rhonda a call. Im guessing Europeanmarine has um
don
can you share a part # for the 3” bolts? Looks like i may need a pair for the top mounts
Brilliant. So many fell victim this simply addressed issue:thumb up2:
Sav, would this also apply to a pro xs 225?
joe. Would that qualify to a 2.5” bolt kit?
xri looks to be 1/2”
cmc looks to be 1/2”
pro xs looks to be ? 5/8-3/4??
Reviving due to repower
Current - 1995 xri 200
repower- 2018 pro xs 225
is the motor plate thicker on the pro xs?
cmc jackplate
From looking at pictures seems the Pro xs motor plate is...
Of the 225’s what “years” are they. I say “years” because before Don jumps in, mercury doesnt identify by year rather serial. :wink:
Thought the post was moved
thank you my friend!
Where is the follow up on this info regarding oiling the compressor??
Good info. Will check out to reference
ya know, we emphasize sourcing a good engine, but if it dont ship safely kinda defeats the purpose.
appreciate it
its a private sale.
Corresponding Merc dealer agreed to crate and pack, but does not want to take ownership dealing with shipping.
Which is understandable
Could you share some contact/driver name ? PM me
appreciate it
And yes, it would be crated and palletized, professionally 100% secure.
I looked into them.
do you recall what company you used?
from what i gathered, fed ex seemed cheapest. Still was in the $600 range
unfortunatly, NY long island is a one way in one way out,...
Looking to source a preferred / recommendation, company to transport an engine
any feedback?
eastcoast
Fl
to
NY
thank you
i tried buy n sell. Figured trailers was a decent shot :confused2:
Any preferred company to tranport/ship an outboard in a crate?
jacksonville fl
to
NY Li
thanks