Championman. I’mfishing West Point Lake in Ga. Lots ofdebris coming down the Chattahoochee River particularly in the spring. I think I’ll try taping over the holes andkeep an eye on the water...
Type: Posts; User: Steve T
Championman. I’mfishing West Point Lake in Ga. Lots ofdebris coming down the Chattahoochee River particularly in the spring. I think I’ll try taping over the holes andkeep an eye on the water...
tdt91. Thank you for the information about the mercury hubkits. I was not aware of that and certainly don’t want the additional damage itcould cause. I’ll try the Michiganwheel # 200 hub kit but...
The problem isn’t the low water pickups getting plugged upits debris getting sucked up through them and then plugging up the line thatgoes from the water manifold to the mid-section to cool the...
Thanks Championman but the ones I’m talking about are thesix holes built into the nose cone. I’ve already changed out the ones on theside of the lower unit to the smaller ones.
2012 E-tech 225 DHLAA . I’m running a trophy plus prop with two plugs and the insert to fit thee-tech. I’ve been having a problem withthe low water pick-ups picking up trash and plugging up the tube...
Yeah, I had the plugs in this prop for 8 years with no issues so something is wrong for them to keep coming out now.
Thanks ChampioNman, I have my mechanic checking it out now with BRP and hopefully they have some ideas.. The pressure relief valve sounds like it might be an issue. Is that
also called the popit...
Anyone else have any ideas? It seems to me that the exhaust is getting hot enough to melt or deform the PVS plugs causing them to come out.
Mactlman - This motor didn't come with a torque tab so that cant it.
Yes Dan, I have a prop seal ring installed. I had the prop worked by Boger years ago and he made a metal prop seal ring that's been on the pro since 2012. Never had a problem until now. I have...
2012 225 HO E-Tec E225DHLAA. I have a Trophy plus prop on this motor. After testing I ended up with two solid plugs in the vent holes providing the best performance. The prop with two plugs has...
2012 225 HO E-Tec E225DHLAA. I have a Trophy plus prop on this motor. After testing I ended up with two solid plugs in the vent holes providing the best performance. The prop with two plugs has...
Thanks everyone for the information. I have a year yet, so I guess I better start saving.
What exactly is done during the 300 hour service on a 2012 E-Tech HO?
Anyone know what the factory recommended max RPM is for a carbureted Yamaha 90 2 stroke?
Thanks Guys. Ill take it apart and see what I find.
I have a friend with a cerebrated 90 Yamaha that has fuel leaking out of a hole in the top carburetor (see photo) and won’t run. He has had the carbs rebuilt twice and it ran fine for a short time...
Thanks guys, Ill try that.
I thought I saw a prop slip calcuator on this site, but can't find it now. :doh: Is there a slip calcuator on the site some where?
Thanks Bigbass225.
What is the recommended WOT water pressure on a 2013 225 E-Tec.
I have a 2002 Stratos 200xl that I am re-powering with a new2013 225 E-Tec HO. I‘m Looking at proppingit with a 26 or 27 Raker or Raker II. I’ve heardthat the Raker II is not that good. The...
Thanks Foxlakephoenix. I'll run my current Trophy on it and see how it works.
Reply to MDtriton21. The Trophy runs good with my current engine. Its a 202 225 DI non HO. Im not sure but I think the non-HO came with a M2 lower unit. What lower unit does a new E-tec HO come...
Thanks, Silkstringz