Search:

Interference from each other? Have you tried stopping the sonar from one transducer to see if the other clears up?

Dealing with this issue currently. Any updates?

http://indepthinstalls.com/

Located near Harrisburg if you want it done right

Everything looks correct as long as that is the correct “b” washer. The “b” washer is different for Yamaha vs Mercury. When I run my merc hub I can’t install the “g” washer either. Are you sure...

Running one on my 721 with a 250 SHO. It won’t win any races but it jumps out of the hole and has great grip cornering at low speed.

I’ll take it. Sent you a PM

What pitch Bravo?

Appreciate the info. I’ll probably throw some on it since it won’t hurt. 2 degree or 5 degree?
Gonna switch to lithium in a couple months. I’ll get ahold of you.

Not trying to hijack the thread but are guys with Phoenix/Sho combos usually running wedges? I can’t overtrim even with my plate up all the way and feel the wedges would get me more lift regardless...

Yes the merc hub kit fits over existing thrust washer. Running a razor 4XL on my sho currently.

2015 721 pro xp with a 250 SHO

Purchased the boat this spring with a 26 T2 but it isn’t in the greatest shape and needs worked. Recently purchased a 25 T1 and ran 73.6mph at 6000 rpm trimmed out...

UPDATE: Called lowrance customer service and once I spoke with level 2 support the woman I spoke with verified that my module was probably faulty. She issued a replacement and I received it the very...

Checked system for updates and everything is up to date. Hard reset all units. Unhooked the power cord and attached it to a separate battery. Box powers up when positive/negative are attached and...

I have updated the box this way twice now and my unit says my active target is up to date.

I have the current software, 22.1 and my yellow wire is hooked to an accessory switch. Unit won’t turn off unless I disconnect the power cable. If I put the same power cable on a SS3D box the...

Can anyone tell me if a 2004 Fict lower unit will fit on a 2006 etec? Both 200hp.

Thanks

Looking for a Powell 723CB spinning rod. Out of stock everywhere. Let me know if you’d like to sell one.

Thanks!

Snyders Run has been ice free as of a couple days ago. These cold nights will probably skim it over soon though.

Mine was the same way. I found that if I go to the sonar page and change the input to channel 1, then go back to live sight it would work. I’m not sure but I believe you have to have multi source...

45-47 degrees in the bay last weekend

Nobody sprayed the grass. All rumors I assure you.

Any report on how the fishing is now on Erie? Would like to go up this weekend after some smallmouth.

http://www.bbcboards.net/attachment.php?attachmentid=270403&stc=1

Mine is a Troll Eze
http://www.tacklewarehouse.com/Troll_Eze_/descpage-TROLLEZ.html

I just put one in my 2003 185. Painless