Search:

Thanks, looks like they do awesome work.
Trying not to halfway rig something, boat is nice and want it to stay that way.

Who or where can I get a deck extension made for my 20 foot Astro?

Be interesting to see, gonna run it pretty much naked Sunday and decide if I'll buy it but already know I most likely will. When rigged it will be HEAVY loaded as I crappie fish and weight toward the...

I'm looking at one with a 300hp Yammie HPDI motor on it, what can I expect out of the boat as far as speed and handling ruff water? Running a 27p tempest.

Thanks, change my search then

On this 482vs is the boat measure 19'3" plus the 15" set back?

Will the Striker Plus run the Panoptix?

Wist the Striker would run the Panoptix

Cool, trying to avoid putting anything else off the front. Wonder if the ps21 could be mounted on the transom? With the 360 I scanned just a small cone so I think it would work.

Spider rigging out the front, 16 foot poles so the baits will be about 35 foot in front of the ducer.

If it would pick up the middle 6 I would be happy. Now I got to start looking at units.

I was, 3/4oz lead and bigger and I could see the rigs. When the 360 come out it was the stuff, for me anyway, but think the Panoptix is ahead of it a good bit. I usually scanned forward only with a...

Thanks in advance guys.
I am a Humminbird guy simply because of the Lakemaster Maps on the Big 4 in north Mississippi, hard to beat the uses of this mapping.
With that said, my transom mount 360...

I got it, restored factory defaults. Thanks

My transom mount 360 deploys and shows to be scanning but gives no images whatsoever, just the black screen with the rings and the sweep. Is the ducer part bad, in a setting on the Humminbird or...

I got to try this, been getting major interference in my 360 scans when my ulterra is running.

Well, it's still not fixed but should be Monday morning. It's out of time, flywheel is about 1/8 of a turn off meaning the keyway is broke and the flywheel has slipped on the crank. Be at the shop...

Actually had the heads off week before last, replaced one due to bad threads in a plug hole. Will call him in the morning.
Thanks again for your help Joe

confirmed, reeds bad, thanks for the help.
Now, what reeds do I order for it?

Any way to inspect the reeds without tearing it all down????

Fresh plugs in and yes it will foul plugs if I idle too much, like a lot of side scanning. Fuel is all good and it does smoke but not bad, manually mixing the fuel at 50 to 1.
As far as the reeds I...

I have a 1984 Merc 200 Black Max that is struggling to get on plane and then not turning up the rpms on the top side, like 4300 or so. Any help will be greatly appreciated, here's what I know:...

Thanks, will report back as I get into it further, hopefully this afternoon.

Fire is good, serial number is 6454221

Will check the fire and get the serial number this afternoon when I get home.