Search:

I’m not sure what the FA model is

All sold

Try again

TTT

I’ve got 4 NIP Hanging on the pegboard. $40 shipped

ttt

Looking for any Megabass baits in color PM Threadfin. Not to be confused with GG threadfin.

Vision 110s, 110+1, trick darter, vibration x, etc.

Anybody have any?

Looking for a few props.

anybody have a Tempest plus 24p or a fury 3 23p?

Check out Fisherman's Central!

Great guys at Fisherman Central. I heard if you mention my name (Matt Becker) they will help you out :wink:

Anybody ever take 7' rods on a plane? Cost to check a 7' rod tube?

I am trying to buy my BBT mounts ahead of time while my 2018 21PHX is being built, and I was just curious if anyone knows what the measurements are for the Bow plate?

Turns out there was a tiny stone in there that wasn't letting the Allen wrench fit properly....cleaned that out and got them off. Thanks guys

I thought so but I couldn't get one to fit. I was using standard sizes though. I'll try a 4mm

Trying to change my lower unit oil and I can't figure out how to get the intake covers off to get to the drain screw :doh::doh:

If you have a down imaging transducer at the bow you will have to do the same up front. But the 2d will work with no issues

When the Lowrance unit's are on standby you will still get interference.

I'm running the same setup except I have a Lowrance 12 at console and 7 up front next to the helix. The structure scan/Down...

Got back out tonight with the 360. No issues with the freezing anymore.

I got the image a lot better than Sunday, but it still wasn't as clear as I'd like. I look at some of the screen shots on...

I played with the unit on land today and it's sitting around 12.6 volts, I had no issues with the freezing so hopefully that was just glitch. I lowered my 360 transducer and re-routed the cables to...

No sir, this is the only bird on my boat. I've got a Lowrance 12 at the console and a Lowrance 9 next to the Helix 10 at the trolling motor

It was pretty cold today, around 35 and windchill probably in the 20's, I'll try it on a warmer day and make sure have good power. Also going to make sure no interference with power cables

I will double check tomorrow, but on one of the screens I saw it said 12.4 volts. I'll confirm that tomorrow.

It was only locking up when I would go into network and turn the SI/DI off on the 360....

I turned the Lowrance units off

Direct wire from the battery, I just ran fresh 10 gauge just for the bow since I'm going to have Helix 10, 360 and Lowrance 9 up there I wanted to have a good power source.

I was just reading one...

http://i77.photobucket.com/albums/j58/fishing889/20170319_153734_zpst6p2e30m.jpg