Thank you so much for your help. Very much appreciated.
Type: Posts; User: Laker272
Thank you so much for your help. Very much appreciated.
Hello All
Was wondering if anyone out there still has the livewell divider for a 86 winner tournament 18ft. Id appreciate some photos. My boat didn't come with the divider and I'd like to make one....
I finally got the call today that my motor was fixed. It was the power pack. I tried 2 other ones and it didn't fix it. Apparently there is 2 packs for that year. The ones I tried weren't the correct...
Spring looked good. Thanks for the response. I decided to let the pros do what they do. It's at the marina getting figured out. Thanks to all that replied. I'll let you know the cause when it's all...
Thanks for the reply. The shraeder valve is in the down position. I will check the timing lever. Thanks. Anything else I can check?
I was on the water when it happened first time. Same result on muffs when the power pack was switched out.
Hello All,
I have a 1998 Evinrude Intruder 150 that is having issues after its winter storage. The motor was fogged. It will start no problem and have 1000 rpm and after a minute of idling it...
Thanks to all for the feedback. We don't plan on hanging out around the hotel. From room to cab, and from cab to room. If we get there and it's nasty I'll stay somewhere else. Sounds like it's going...
Im hearing the same about the hotel we are staying in. Lol. Looks like it's going to be an adventure. We are staying at the Super 8 Airport/Expo Center on E Archer. Is this a bad area? I maybe should...
Also. I was wondering if anyone who is spectating by boat has room for 2 more, please let me know. Of course we will cover the gas cost.
I sure hope there is a bus to the launch/blast off site. I to am flying down from Canada to cheer on Charles. I've heard there has been in the past. Fingers crossed.
Check your common ground for bad connection. If not You have a wire grounding out somewhere. I had the same problem on a past boat and it turned out that my ignition power wire had a fray in it and...
I purchased one off EBay that worked. I had to replace the hub as my boat is from the mid 80's (Winner Tournament). I wouldn't think there would be an issue if your old wheel and the new one mounted...
I was convinced that all wiring was correct. I decided to hook my meter up to the control box where the harness plugs in. I put + prong in hole where the ignition power (purple) lead would go and the...
I think I might have confused you into thinking the tach was working. I have re-wired all the gauges. There are 3 wires coming out of the harness from the control box. A purple, a black, and a grey....
I have looked the wiring to all gauges over several times and it all looks as it should. It was done a little sloppy by the last guy so I'm re-wiring it all. I have the lights and power(ignition)...
If I unplug the harness all is good. I used jumper wires to replace the purple and black wires and it blows. It doesn't blow with just the tach sending wire attached. Could a faulty temp gauge cause...
Hi guys. I am having issues with blown 20A main fuse. I have recently had my 1986 Johnson 140 VRO (removed) totally rebuilt. The motor is hanging back on the boat and everything is good. I was...
Lol. I knew it to, I just couldn't find it. It makes it a little harder when your bobbing in the middle of the lake. Thanks again.
As suspected, it was the main 20A fuse. It was the first thing I looked at. The fuse had sheared off clean at both end caps. When it was removed it was just a tube and I figured it was a guide tube...
Okay. Thanks guys I will try everything mentioned and go from there. Thanks again.
We were on the lake today and made a short run. When we stopped we turned the motor off with the key, and the motor wouldn't trim up. The engine wouldn't turn over either. There seems to be no power...
All apologies Don, I spoke to the guy who rigged it late last night, that was not how it was done. I misunderstood what he was saying. Thank for your time
Hello Don,
I recently re-rigged my boat with a 2006 optimax 150. The remote oil tank was new so I followed the bleeding instruction. The on engine reservoir was full, key on, shift neutral to...
Thanks. Don't have a link but the seller was onlineboatparts013. There are lots of steering wheels on EBay.