Let not forget about the ground. Verify you have a good connection to the ground rod and water pipe ground. This is assuming that your on a 3 wire system and not a two wire.
Type: Posts; User: BCCougarFTD
Let not forget about the ground. Verify you have a good connection to the ground rod and water pipe ground. This is assuming that your on a 3 wire system and not a two wire.
The problem with this is that its not over after he leaves the targeted female, They will then threaten him for more money going public for his actions and photos shared if he has, net results of...
In Bardstown, look up scout and scholar, that in the Distillery area.
Here's the scoop, Per The NEC there is a pull test that measures the tension on the outlets. With this, you can get this tester at Amazon. Per the NEC, I have not seen a residential requirements like...
I have had both the P4 and Cougar FTD on Erie, Detroit River and St. Clair. I been in some white knuckled situations, and both came thru very well. Both rode great. Its all about the driver and how...
We have a 200 Mercury 200 4S
VIN: 3B102082 on a pontoon.
There is no trim gauge and didn't thing about ordering it with one. Looking to see what type of trim gauge I should order for this...
Find a shower pan that is as large as you can that will fit, then build a shower seat / bench to fit from pan to wall, and tile it.
Sold, Thanks for the looks
Pat, I do, and PM sent,
Eric
...
You need to set up the Chart to communicate the NEMA protocol to the speedometer.
Look at Resort World, its not even a year old yet, nice location on the norther end.
We just made the switch to T-Mobile home internet a few weeks ago, due to the new house under construction. At this time, we will not have any other option for internet. We do a lot of streaming in...
Hello Don,
Thank for the reply, the toon has no Smartcraft at console, looking to complete the most economical way. Analog is fine for this case.
Thanks,
Eric
Hello all, The wife has a new StarCraft pontoon with a 200 4S. There is no trim gauge on it and I do not what her to knock off the lower unit when in channels. Is this motor setup digital or analog,...
With the same experience as you, there is no rime or reason on functionality with them. The hand held remote does seem to work better.
I've had great deal of issues with the Stomp buttons. Locky...
Spoke with Tech Support today. With the current world conditions I was not quoted a ship date but second inline for new buttons. So hopefully by mid summer. Other than this disappointment Minn Kota...
Thanks, Will do,
Looking for some help here. I have two sets of the new stomp buttons, one set on each side of the bow, for a paired dual raptor setup.. They been slowly not working. One quit last fall, now 3 of the...
Need to watch this, as the wife had leg cramps and then started to have swelling, turned out to be blood clots, so keep an eye out for swelling.
Went with Blast LED as they seemed to be priced reasonable. Kit came with two strips of RGB LED's that ran the length of the toon, and had to cut for proper length. The kit also included a aluminum...
For starters, the Echo Map will not talk to the GPSMAP via ethernet. Learned that the hard way. They will share information via NEMA 2000 network. I would recommend setting that network up with your...
Currently have a 2013 Cougar FTD, and fish Erie and St. Clair every year. I have to say I've been out in conditions that I probably shouldn't have been in. So we will leave that there. I would...
At year two, the boards went out on mine, the following week, two other in the club has the same issues. Now I carry an extra set on the truck just in case. We have noticed that we all heard a loud...
Can you post the color, year, and if the units are bluetooth?
Thanks
Eric