When I had the Fortrex on my boat I had a LSS 1 mounted on it. I used the side scan to find brush piles and crappie beds if my way point was off or the gps was off a bit that day. Now that I have the...
Type: Posts; User: justinp61
When I had the Fortrex on my boat I had a LSS 1 mounted on it. I used the side scan to find brush piles and crappie beds if my way point was off or the gps was off a bit that day. Now that I have the...
JB Weld Marine epoxy is good and available in most hardware stores.
I agree, mine is on a manually resettable breaker, I don't ever trip it for charging though.
:thumb up2:
I don't ever cut the power to mine when charging, it's off at the pedal though.
https://www.bluesea.com/products/category/16/Fuse_Blocks
Good trolling motors, I removed mine to i stall a Ghost.
It's finished, before and after photos.
547981
547982
I fish Lake Barkley 99% of the time and do fish KY a little. Yes, Navionics shows roads and bridges, but they aren't always there, they either were never there, or nothing remains of them. The ones...
The battery tender plug wouldn't work with where my plug was located so I used this one.
https://www.amazon.com/gp/product/B06Y5XQQNV/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1
Same mapping, just different features.
Time on the water is the best teacher, don't be afraid to push buttons and make adjustments.
Keep us updated.
It just takes some trial and error with the settings and transducer. I primarily cast for crappie and generally run my range at 60', in shallow I have to pull the range back to see my jig.
547304...
K&K Kustomz were good to me.
There you go bringing reasoning into an electrical discussion! :laugh:
You'll be fine running the power wire directly to the fuse panel, no need to over complicate it.
I had a LSS 1 on my TM before I got AT 2. About the only time I used it was to find a brush pile or bed I had missed. I'm a crappie fisherman.
I previously had a LSS 2 on my Pro, having two AI 3-1's I installed on in the LSS 2's place. I think I prefer the LSS 2 over the AI 3-1, the image is much brighter.
Do you have a separate 2d transducer running? My Pro running a 3-1 will look like that if I don't stop sonar on the Gen 2 12 that's running a skimmer. The screenshot below is my Pro with the 2d...
Three amp in mine also.
^^This^^
I fuse anything that has a power connection.
Thanks Fireball.
I went with the vinyl. Now to get the boat ready.
546417
