I’ve got a whole breaker box out of a 2003 200pro xl if that would work.
Type: Posts; User: Stratos1387
I’ve got a whole breaker box out of a 2003 200pro xl if that would work.
I have a 200 pro xl and went from a 6 inch to a 8 inch and now. 10inch plate.
Possum ridge/state park ramp
Thank you for the help I don’t get down that way much anymore.
How’s the nights fishing been? Thinking about heading down for the weekend tomorrow and haven’t night fished down there in years.
Update picked up a 25 T1. It’ll turn 5500 rpm now but only 62-63 mph. Something just isn’t right.
Put a set of plugs in and ran it. Ran 5150rpm wise. But it was cooler yesterday also. Any more suggestions. It’ll run 68mph at 5150 rpm
I’m running at 26 pitch prop I can run a 25pitch and pick up
some rpm
Running a 225 HPDI vmax motor won’t run over 5000 rpms. Checked compression motor was cold and every cylinder was 110-115 psi. Motor starts and runs fine no smoke no miss fires or hesitation. I...
Are the throttle cams the same on a 225 and 250 the same? I know the one on a 200 is shorter and only lets the butterfly’s one 3/4 throttle. Thanks!
Update found the correct ECU and ran the boat last night. I did not pick up any mph or difference between the 225 and 250 swap. Do I need to adjust anything?
Update: figured out the ECU I bought was off an 04. Looking for one off an 05 or newer now. Any ideas where I can find one?
I have same boat with a 225 HPDI only getting 69mph at 5750rpm 25m prop that’s been worked.
Have a 07 225 HPDI. Had the idea to swap the injector drivers and the computer out with 250 HPDI stuff. I’ve heard it can be done BUT I back boat in and turn the key the motor starts and has a miss....
Question have a 225 HPDI wanted to
change lower unit oil pulled the plug and nothing but water came out very little oil. I know I need to put new seals in the lower now! Question my motor hasn’t...
Still have EMM?
What’s your speed?
What speeds are you getting and setup?
03 200 pro xl. Yamaha 225 HPDI running 2.75 below pad 10 inch jack plate turning a 25m prop 68-69 at 5500. Shouldn’t this boat run faster? I have 3 group 31 batteries in back but I don’t have boat...
I know there’s a U.S.A. bassin tourney and KBN out of Kuttawa Saturday
Headed down to Barkley Friday for 4 days to fun fish, only get down there once a year or so. Any luck down there bass fishing right now? Thanks!
I have a 03 Evinrude 200 lower unit work on a 99 johnson 225?
03 200 pro xl 225 Yamaha HPDI. 8 inch plate at 3in below pad. Getting 68mph at 5000rpm 18psi water pressure. Turning a 26 turbo lightning prop. Need suggestions of what to do.
Buying a 08 225 HPDI was wondering what rigging harness I will need as I am changing from Evinrude and was wondering was else I will need.
Going to repower my Stratos from an Evinrude to a Yamaha HPDI 225. What are somethings that I need to know about this motor. Oil, maintenance etc. I know I heard something about filters. Thanks!