that don't sound good. it just sounds like a software issue . my gen1 360 worked great.
Type: Posts; User: ky2200
that don't sound good. it just sounds like a software issue . my gen1 360 worked great.
60 ft in 20 foot of water
just installed a new M360 on my Ultrex connected straight to Helix 12 MDI+ G3, I updated latest sostware (2.440) ,, First
Trip to lake I'm getting a rotation scan on screen but it's black.
No...
I have a 11 series Lance with a F350 Dually and also pull 22 ft . Gambler … The truck will handle the weight ok without the air bags but when using the 36 in . extension for towing the boat the bags...
Since your by yourself ,, have you considered a cab over camper in the bed of a dually,, I have a 1181 lance with slide outs .. also pull a 22 ft Gambler with no problem.. they make several large...
My Extension hitch is by torklift (superhitch)
. I had to install another receiver on the truck.. it uses 2- 2"recievers , Very heavy setup but no worries while puling. just had to fab up an...
I have a Lance 1161 Hauling it on a Ford F350 Dually Crew Cab.. I pull a 22ft Gambler behind it ,, I have the air bag suspension kit to help level the load. Have to use a 36" extension receiver to...
thanks for posting .. mine has done same thing ,,, couldn't figure it out …
I have the Lance 1181 on F350 , pull 22ft Gambler behind .. love the set up . did install air bags to level the load ..
thanks so much
I have found a good price on a solix unit ... will they link to the 1198 as well..
thanks , I have the Ethernet Switch box already ,, Running 1198,998,898 now.. just wanted to make sure before purchasing the mega unit ,,, thanks again for the fast response.
I have a 1198 series I want to move to front of boat and purchase a new 10 or 12 mega unit for console ... will the new helix mega units link to the 1198 . I am running an I link Terrova trolling...
I have an 898,998,and 1198 unit on my rig , all Ethernet hookup. I am updating to a minn-kota I Pilot Link Trolling Motor. What versions of software are the latest that I need to install on my units...
Well, after being at the service shop 2 weeks, They reported the motor run fine after hooking it up to external 24 volt system in the shop .. I take it home , install it back on the boat and still...
thanks for the ideas ,,, We checked both batteries voltage , was showing 12.6 and 12.5 on them . Actually took to NAPA and load checked both batteries . They checked good
We unhooked the foot...
I had my Terrova die on me yesterday after about an hour of fishing. Unit is 2 yrs old and have had 0 issues with unit. We have checked the voltage up to the circuit board and showing 24 volts up to...
great looking job. I have a 2200 needing the carpet replaced.. Just keep putting it off.
check on Boat trader... Good looking rig w/300 for sale on there for some time now...
check your thermostats... should open up around 155 deg.
Good Luck on the big G ,, Right now it's feast or famine... Some are really having hard time finding anything .. Then reports of 30 lb bags showing up
I would say the mk mounting bracket is quite a bit lighter in weight than the cable steer units.. The 80# , 24 volt has worked well on my 2200 ///. The 54 '' shaft has well also. I had a 72#...
Mounted an I pilot mk on my 2200 and ran into some issues. With the center mount the footprint of the mk is a lot smaller than the motoguide I was using... Had to install a plate to boat then mount...
I installed a MK I pilot on my 2000 2200 last spring, 80# thrust w 54 '' shaft .. THE BEST MONEY I HAVE SPENT !!!!!!! You will be running into a couple of things on installation... In order to mount...
great looking boat,, I have to say that because it's exactly same as my 2200 ... You will love it . I ran a 27 powertech until I slung a blade .. Bought a 27 trophy and not half the prop the...