Search:

Thank you Sir

Sorry. P200TLRX model #

Hey guys. Picked up a new to me flats boat a couple of weeks ago with a 200 VMAX carbed motor. Ive never owned a Yamaha. Rebuilt the carbs this weekend and found that my throttle cam roller has a...

Im running a worked 24 Tempest on my 19ft Hydra Sport dual console with 175 intruder. I haven't tried any other props. When I bought the boat, it had a cheap 25 Michigan Wheel on it.

Several...

Trying not to hijack the thread, but was that with a full load? What prop?

You might hit the guys up over in the evinrude/johnson forum. Im certain they will tell you to do a decarb/compression ck. Then, if it's the same, pull the head and take a look at the cylinder.

Well, I feel like Ive almost got her dialed in, but I haven't tried any other props. Someone said tempest, I bought a tempest. I still would like to try an original raker, and a renegade or Tr04. ...

I have the same boat with a 175 intruder, 6 inch jackplate, and 24p tempest. I am just getting close to getting mine dialed in. It will run 60 now with a FULL heavy load. I still have some...

Hey Pat

Have the opportunity to grab up a 25 renegade for 100-150 bucks. Will probably need B&B. Think its worth it for my boat?

Thanks for all of your help! I've learned a lot. I've always just used a boat as is when I bought it.

Im gonna run it like it is until it cools off.

Im not an outboard mechanic at all, but I do try to fix my own stuff. On Jet skis, when we would shear flywheel keys, it would help to lap the wheel to the crank.

https://youtu.be/k_JpRxubFZQ

I dont mind spending the money. I enjoy taking it out and running it and trying to get it right.

I did move it up 1 more click, and took it out today by myself. Saw some different things I didnt...

Thats the exact same thing Mark told me and why I stayed with the Tempest. What would be a good 4 blade to use as a spare? The renegades seem a little hard to find.

So, its possible to have to re-prop once it cools since Im already running right at my max RPM. Correct?

What Raker and Renegade would be comparable to the 24 pitch Tempest?

Have a 19Ft hydrasport with 175 intruder. Been working with the guys over in the setup forum to get it squared away, prop, plate, etc. I settled on a 24 Tempest worked by Mark, and 6 inch manual...

Installed jackplate Friday eve. Made several runs this am. Started off with what we believed was 3.5ish prop to pad (all we had was asphalt to set PTP). 1st run, water pressure dropped to 10 once...

Thanks. Was selling the motor. Buyer didnt care anyway.

I have a 91 40 hp Johnson. I sprayed the model/sn decal off of it with the pressure washer. Is there another location to find it on the motor?

Nice to meet you. We left shortly after you guys.

I was out there this am, only my second time, didn't see a cone anywhere.

Well, all the engine hoists were rented from Sunbelt. So, still havent hung my jackplate.

Did run the boat a little this evening with the worked prop. Running 59@5300 with a full load (30 gal...

I took a step back and put my boat in the shop and sent my prop off. Nothing wrong with the motor really, but wanted to go ahead and get carbs rebuilt with new bowls and tilt/trim rebuilt due to the...

Lots of auto alternator/starter/electrical repair shops that can get parts like that and repair outboard starters. They will need the numbers on the starter.

Cost me 40 bucks to send my Tempest FEDEX ground with 700.00 in insurance.