Does anyone make a shaft mount that attaches to the Ultrex mount? Looking for something similar to H'bird 360 mount. I'd like to move the AT transducer independently of the TM especially when using...
Type: Posts; User: Rudeman
Does anyone make a shaft mount that attaches to the Ultrex mount? Looking for something similar to H'bird 360 mount. I'd like to move the AT transducer independently of the TM especially when using...
NEVER use silicone on fiberglass. Marine-Tex is a good solution. Give it plenty of time to fully cure.
Anyone having issues getting the site to render properly in Firefox? I had to use MS Edge to properly view the site
Might want to pour in some fuel treatment like Seafoam; might unstick the valve...
Definitely stepping up their game. Glad to see it and can't wait to see one on the water!
I beat the crap out of my Ultrex every time out and it just begs for more of the same. The only issue I've had is a spun prop. It became noisy but it still propelled the boat. Replaced prop and now...
Photo would be helpful. Older Rangers used the thick nylon rope-style insert, while others used the black vinyl piping and of course the type mentioned in the thread above.
Very good deal, especially for a complete set-up with a transducer and mount...everything. I picked one up last month and then bought a 9 Carbon from a member. Next is the AT set-up.
I plan on doing this mod before the spring season starts up. Going to run a 30A breaker off the battery, a bus at the console and a bus at the bow, 10ga wire.
- Is it not possible to just mount...
SeaStar Pro - good for up to 300HP
I used a BPS universal fit 18ft cover for my 361V when it was parked in our garage. I paid $85 for it. Came with straps and bag.
Very nice work. Looks like some thought was put into the rigging job...imagine that!
I got this 2019 F-250 for $51K back in 2019.
460061460063
Rapala, then Lucky Craft
I bought an Ultrex because, at the time, that was the only option for positional locking feature on a TM. It's been nothing but outstanding. It's been reliable, and very tough. I beat on mine every...
I bought an Ultrex because, at the time, that was the only option for positional locking feature on a TM. It's been nothing but outstanding. It's been reliable, and very tough. I beat on mine every...
That's the mount I used on my old boat. I believe the HDI Skimmer will work on all HDS Touch units.
I have a Northstar and I'm not happy with it. Not significantly better than what it replaced and it still will not run all day on a full charge. Another guy in our club, same model and yr boat/motor,...
Make sure the PVC runs aren't too long as the pipe will begin to sag. The only issues with the exercise balls is they lose air, and they trap moisture where they sit against the carpet.
This is the hub from my Ultrex prop after hitting one too many submerged stumps/laydowns. The shear pin looks perfectly fine but the $40 prop is toast. It still worked but I took a look after it...
New boat? It's under warranty; should include the trailer too.
My boat does everything I need it to do, and I don't need a new truck. So, I'd take the 100K and get a Four-stroke motor and add Active target. The rest of the money would pay for a garage expansion...
I agree. I installed a SeaStar unit in my previous boat and it was the best upgrade, period. If as you stated the SeaStar is out of your budget limits, take a serious look at Uflex. They've been...
Since you're redoing the service area, do yourself a favor and avoid the use of silicone RTV. Use the polyurethane or polysulfide-based sealer; especially on fiberglass. They work better and are...
Duct tape a piece of fiberglass window screen over it. It'll keep them out and allow water to flow out.
