Search:

My transom transducer takes a beating here on Lake Fork! I’ve managed to even bend my transducer shield before and assumed my transducer is OK!

i’ve started noticing that my SI and 2D will pick up...

Is there any way to make waypoint icons and text smaller?

Duh!....thank you!

I need to thin out my waypoints as I've hit the maximum number allowed.

I can delete many when I edit them on the screen, but there are a lot of waypoints that don't give me the option to delete....

Lift up on the tongue as you pull on the pins!

FWIW, I've been chasing this a while with my 2015 Cougar. I ended up buying an adjustable height receiver and the best by far is 18 1/2" to the top of the ball. Conventional advice says a little...

I agree with Capw, Bypass the port and connect the cable directly to each unit! If they share waypoints then I’d say the port is bad!

if they don’t share waypoints, then the cable is bad!

Unscrew the power cord into the hub and use a 12v test light to confirm!

i just had a similar problem 2 weeks ago and while my fuse was good...I had a broken connection and didn’t have power to...

Check power to Ethernet Hub first! Check cables next!

in my experience, the hub is rarely bad!

Sorry, I tried to delete but it won’t let me do it!

I bought a second ZLC so I could copy the AC Data files over to the new card and see the AC data on both graphs!

I did this once before and everything worked great, however I lost one of the cards...

I bought a second ZLC so I could copy the AC Data files over to the new card and see the AC data on both graphs!

I did this once before and everything worked great, however I lost one of the cards...

Not sure about the wiring as I’m second owner! I’ve had this setup for a year and this voltage drop issue just started about a month ago!

Console unit is showing 10.1 volts even with big motor running and putting out 13v! New battery!

What do I need to check?

I've had both and I much prefer the box!

My only complaint is the storage compartment floor sweats when the cooler is full of ice! I'd like to see a thermal break so my stuff doesn't get wet!

Robert, thanks for your feedback! It's such a large file I am hesitate to load them!

Will it slow my down my Helix 12's?

I never use the base maps and wonder if I should download that amount of information?

I have one.....no plugs works for me!

Anything over 8" will void your warranty! FWIW!

My Ultrex came with a wire pull instead of the typical braided rope! I cut mine too short and don't want to spend $40 for a new assembly from MK!

What size vinyl coated wire is used with MinnKota Ultrex pulls?

Thanks!

Set surface clutter to 7....worked for me!

I'll answer my own question in case others were in my shoes!

I mounted my new 360 to my new Ultrex and connected the 360 into my ethernet network without installing another HS sensor. It works...

I have a HS as part of my network with 2 Helix 12's. When I add my Ultrex , can it use the same HS thru the network like the Onix?

I'll answer my own question in case others were in my shoes!

I...

I tried everything! Once I moved surface clutter to 7 it has read the correct depth every since....even in 1' of water!