SN is 0G423933 XR6 150. My Tach is pegged all the way over. It doesn't move. I ran the boat yesterday and the tach never worked it stayed in the pegged position. What's my problem?
Type: Posts; User: bsud
SN is 0G423933 XR6 150. My Tach is pegged all the way over. It doesn't move. I ran the boat yesterday and the tach never worked it stayed in the pegged position. What's my problem?
Email sent through your website. Thanks Don!
The hose was clogged with trash. It's now peeing water since I unclogged it. I did take thermos out and they looked pretty rough and not Sealing good now, a little water is leaking around them.
...
I'm pretty sure there was water coming out there at cav plate, cause it was coming out up above the muffs
[QUOTE=JOE54;9450993]should have seen some water in that time check for obstructions in hole ,you see any water on top of cav plate coming out
Not sure if water coming out at the Cav plate. I...
Yeah but how long? Before it seemed to start peeing in 1-2min. It ran this time I know 5 min and nothing. I know I'm using hose and muffs, but I have always used that in the driveway just to keep...
But I have another issue. I started it up with muffs, and let it run right around 4-5 min and it never started peeing water! It's scary to stand there while running and wait and wait and wait!
Call me stupid!! I found my own problem which was me. I forgot to hook the neg cable up
330132
Here is pic of battery connection. Also when I turn the key to start my gauges move up a bit from where they are then drop back when I'm not trying to start motor.
When I turn the key to on position, everything is working properly off that cranking battery. When I try to start motor so.ething at motor makes a noise but it will not turn over.
I know the Battery is connected properly. Also I bought a battery, put it in, Nothing so I took it back and told them they gave me another one and tested it before I walked out the door with it.
I've triple checked and that's all good. Now I'm getting a buzzing sound like the starter is spinning. All my gauges are working right but it's not turning over. The battery has full voltage on it.
Ok just added it in that section thanks
SN is 0G423933 XR6 150. My battery was bad when tested at auto store wouldn't hold a charge. Got a new battery and installed it and now when I turn key nothing dead silence! One thing I've noticed is...
No I double checked all that and it was right
Where is the insulator switch located?
SN is 0G423933 XR6 150. My battery was bad when tested at auto store wouldn't hold a charge. Got a new battery and installed it and now when I turn key nothing dead silence! One thing I've noticed is...
Yeah I wasn't talking about cranking out of water. I would never do that. He just cranked it and his partner unhooked it. It looked more like a being cautious deal to make sure it's warmed up before...
I do have the XR6 mercury (carb) so it does take some time to crank and keep running.
Ok here is a General off the wall question. Do you crank your motor before you unhook and back off the trailer. I noticed other day someone doing this and was like what? Because I have always just...
Does anyone know if there's a new discount code for protec? The BBCMEM is not working.
I know holding mine in for a long count doesn't do anything for mine. I've tried holding it in for different counts and no help. Mine works best if I just push in key and turn it, then when started I...
Where exactly are the idle screws and how many are there?
Should this be done while engine is running?
it has cut off a few times as I'm idling up on the trailer.